Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
01.11.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/2-7

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/2-7
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/2-7
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LN0902 inline2414 -crossline 6992
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Lundin Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1343-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    45
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    19.07.2011
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    01.09.2011
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    01.09.2013
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    01.09.2013
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    INTRA DRAUPNE FM SS
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    113.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2500.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2500.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    2.1
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    103
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY PERMIAN
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ROTLIEGEND GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 46' 47.77'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 39' 16.28'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6515749.45
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    480024.06
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    6561
  • Wellbore history

    General
    Well 16/2-7 was drilled about 5.5 kilometres southeast of the discovery well for the oil discovery 16/2-6 (Avaldsnes) on the Utsira High in the North Sea. The 16/2-6 Avaldsnes discovery was proven in September 2010 in Middle-Late Jurassic reservoir rocks. The primary exploration target for 16/2-7 was to delineate the presence of hydrocarbons in Middle-Late Jurassic sandstones above the 1922 m MSL oil-water contact established in well 16/2-6. The well?s secondary objective was to determine the reservoir properties of the Rotliegendes Formation.
    Operations and results
    Appraisal well 16/2-7 was spudded with the semi-submersible installation Bredford Dolphin on 19 July 2011and drilled to TD at 2500 m in Early Permian Rotliegendes Group rock. A 9 7/8" pilot hole was drilled from the seabed to 710 m to check for shallow gas. Some sand was found at the pre-warned level, but without shallow gas. No significant technical problem was encountered in the operations. The well was drilled with seawater and hi-vis pills down to 710 m and with Performadril WBM from 710 m to TD.
    BCU/top Draupne Formation was encountered at 1936 m approximately 15 m deeper than prognosis. This was due to a small fault that was originally not accounted for in the seismic interpretation. The well proved oil in Intra Draupne Formation sandstone from top at 1939 m and down to the OWC at 1947.5 m (1922.5 m TVD MSL), confirming the OWC found in 16/2-6. Reservoir quality was good to very good and the reservoir continued through base of the Intra Draupne Formation sandstone at 1964 m and into the underlying Sleipner with base at 1984 m. Total net reservoir was 35 m. The Permian Zechstein and Rotliegendes Groups were encountered within the depth prognosis uncertainty. Reservoir properties were not found in these sequences. The first oil show was observed in the Draupne Formation at 1937 m. Good oil shows were recorded down through the reservoir to 1948 m. Below 1948 m the oil shows became progressively weaker with no further shows observed below 1957 m.
    Five conventional cores were cut in the well. The three first were cut from 1924 m to 1973.5 m across BCU, Draupne Formation shales and sandstone and into the underlying Sleipner Formation. Core no 4 was cut from 2198 m to 2217 m in the Zechstein Group, and core no 5 was cut from 2283 m to 2310 m in the Rotliegendes Group. MDT wire line fluid samples were taken in the Intra Draupne Formation sandstone at 1941.62 m (oil), 1945.54 m (oil), 1963.51 m (water, and 1963.52 m (water).
    The well was permanently abandoned on 1 September 2011 as an oil appraisal.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    710.00
    2500.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1924.0
    1950.8
    [m ]
    2
    1951.0
    1967.9
    [m ]
    3
    1968.0
    1973.4
    [m ]
    4
    2198.3
    2216.9
    [m ]
    5
    2283.0
    2309.7
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    94.4
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Oil samples at the Norwegian Offshore Directorate

    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    MDT
    1950.84
    0.00
    OIL
    13.08.2011 - 00:00
    YES
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CMR XPT GR
    1782
    2036
    ECS HNGS XPT
    2098
    2487
    FMI MSIP GR
    1722
    2040
    FMI MSIP GR
    1915
    2046
    FMI MSIP GR
    2012
    2494
    MDT GR
    1941
    2021
    MSCT GR
    1802
    2038
    MSCT GR
    2106
    2483
    MWD - GR REMP
    133
    2098
    MWD - GR REMP DEN NEU AC
    689
    2497
    PEX HRLA ECS HNGS
    1771
    2037
    VSI GR
    137
    2489
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    216.0
    36
    216.0
    0.00
    LOT
    SURF.COND.
    20
    700.0
    26
    705.0
    2.34
    LOT
    PILOT HOLE
    710.0
    9 7/8
    710.0
    0.00
    LOT
    INTERM.
    13 3/8
    1772.0
    17 1/2
    1779.0
    1.60
    LOT
    INTERM.
    9 5/8
    2098.0
    12 1/4
    2100.0
    1.50
    LOT
    OPEN HOLE
    2500.0
    8 1/2
    2500.0
    0.00
    LOT
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    353
    1.03
    Kill/Displacement mud
    540
    1.39
    23.0
    Performadril
    705
    1.35
    21.0
    PERFORMADRIL
    705
    1.39
    11.0
    Kill/displacement mud
    754
    1.35
    22.0
    PERFORMADRIL
    1363
    1.35
    40.0
    PERFORMADRIL
    1690
    1.39
    24.0
    Performadril
    1868
    1.20
    32.0
    PERFORMADRIL
    2050
    1.20
    33.0
    PERFORMADRIL
    2134
    1.14
    20.0
    PERFORMADRIL
    2217
    1.14
    24.0
    PERFORMADRIL
    2464
    1.15
    37.0
    PERFORMADRIL
    2500
    1.14
    32.0
    PERFORMADRIL
  • Pressure plots

    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.23