Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
22.12.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

34/10-33 B

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/10-33 B
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/10-33
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    ST 8134-156 CP.296 OG 297 (BHPOS.CP.270)
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Den norske stats oljeselskap a.s
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    608-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    75
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    27.04.1989
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    10.07.1989
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    10.07.1991
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    01.01.2012
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    BRENT GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    23.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    134.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3942.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    93.7
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    102
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    MIDDLE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    NESS FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    61° 7' 34.44'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 12' 57.1'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6777262.00
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    457756.18
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    1407

  • Wellbore history
    General
    Well 34/10-33 B is a sidetrack from the vertical appraisal well 34/10-33 on the Gullfaks South structure. It was the first horizontal well ever drilled on the Norwegian continental shelf. The main purpose of the well was to perform a long period test from a horizontal well through the upper part of the Brent Group. The well should provide important production data and the results from the well should be used to calibrate the simulation model for the reservoir and also to update the geological model for this part of the Brent Group.
    Operations and results
    Appraisal well was sidetracked 27 April 1989 from the vertical at 1840 m, just below the 13 3/8" casing shoe. The well was drilled with the semi-submersible installation Deepsea Bergen to TD at 3942 m in the Late Jurassic Heather Formation. The well bore was drilled with gel/lignosulphonate mud from kick-off to 1864 m and with Interdrill NT oil based mud from 1864 m to TD. The hole was approximately horizontal in the interval 3670 - 3942 m. During setting of the 7" liner for testing of the hydrocarbon zone, the pipe got stuck and broke between the extension pipe and drill string. Fishing was unsuccessful, and the planned test was therefore not possible. Plugging was performed, and Statoil informed NPD and the partners about the alternatives for future operations. After evaluation of FMT data, it was decided to go for a new sidetrack, 34/10-33 C.
    The formation tops came in close to the prognosis. The Brent Group, top Tarbert Formation was encountered at 3215 m. Sandstones of the Brent Group contained oil and gas. Due to lateral pressure barriers the Tarbert Formation proved to be water bearing in the horizontal part of the well bore, although good oil shows were described on cores and well site samples up to 3816 m.
    Three cores were cut in the intervals 3742 - 3751 m, 3785 - 3790 m, and 3850.5 - 3860 m in the Tarbert Formation. Two runs with the FMT tool on drill string was performed in the horizontal part of the well. In addition, five tests behind the 9 5/8" casing was performed with CHFT (Cased Hole Formation Tester). One segregated fluid sample was taken with FMT at 3892 m (1 litre water and 8 litres oil/filtrate). Two segregated fluid samples were taken with CHFT at 3299.5 m (3.2 Sm3 gas, 0.9 litre fluid) and at 3335.0 m (2.4 Sm3 gas and 1.1 litre fluid).
    The well was plugged back and abandoned on 10 July 1989 for the sidetrack 34/10-33 C.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1850.00
    3942.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3742.0
    3751.0
    [m ]
    2
    3785.0
    3790.6
    [m ]
    3
    3850.0
    3859.8
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    24.4
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 3742-3747m
    Core photo at depth: 3747-3751m
    Core photo at depth: 3785-3790m
    Core photo at depth: 3790-3791m
    Core photo at depth: 3850-3855m
    3742-3747m
    3747-3751m
    3785-3790m
    3790-3791m
    3850-3855m
    Core photo at depth: 3855-3859m
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    3855-3859m

  • Lithostratigraphy

  • Geochemical information
    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    0.28
    pdf
    0.58

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    1.53
    pdf
    36.21
    pdf
    32.19

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    4 ARM CAL GR
    1822
    3419
    ACBL VDL CCL GR
    1800
    3475
    CDL CN GR
    3185
    3475
    CHFT HP GR
    3238
    0
    CHFT HP GR
    3299
    0
    CHFT HP GR
    3335
    0
    CHFT HP GR
    3336
    0
    CHFT HP GR
    3358
    0
    FMT HP GR
    3551
    3894
    FMT HP GR
    3551
    3892
    GYRO CCL GR
    1690
    3440
    MWD - GR RES NEU POR DEN
    1840
    3942

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    219.0
    36
    220.0
    0.00
    LOT
    INTERM.
    20
    459.0
    26
    461.0
    1.43
    LOT
    INTERM.
    13 3/8
    1822.0
    17 1/2
    1838.0
    1.53
    LOT
    INTERM.
    9 5/8
    3484.0
    12 1/4
    3493.0
    1.70
    LOT
    OPEN HOLE
    3942.0
    8 1/2
    3942.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    1840
    1.44
    21.0
    9.0
    WATER BASED
    09.05.1989
    1864
    1.45
    18.0
    5.5
    OIL BASED
    09.05.1989
    2100
    1.45
    24.0
    3.0
    WATER BASED
    03.05.1989
    2982
    1.58
    24.0
    6.5
    OIL BASED
    19.05.1989
    3024
    1.58
    26.0
    6.0
    OIL BASED
    19.05.1989
    3088
    1.58
    22.0
    7.0
    OIL BASED
    19.05.1989
    3171
    1.58
    25.0
    7.0
    OIL BASED
    19.05.1989
    3200
    1.58
    23.0
    6.5
    OIL BASED
    19.05.1989
    3241
    1.58
    22.0
    6.5
    OIL BASED
    19.05.1989
    3241
    1.58
    26.0
    7.0
    OIL BASED
    19.05.1989
    3402
    1.58
    27.0
    13.0
    OIL BASED
    24.05.1989
    3415
    1.58
    27.0
    6.5
    OIL BASED
    24.05.1989
    3458
    1.58
    27.0
    7.0
    OIL BASED
    24.05.1989
    3484
    1.50
    25.0
    6.5
    OIL BASED
    07.06.1989
    3485
    1.50
    24.0
    6.0
    OIL BASED
    08.06.1989
    3493
    1.58
    28.0
    7.0
    OIL BASED
    25.05.1989
    3493
    1.59
    31.0
    7.0
    OIL BASED
    29.05.1989
    3493
    1.42
    20.0
    6.0
    OIL BASED
    02.06.1989
    3496
    1.42
    18.0
    8.5
    OIL BASED
    05.06.1989
    3588
    1.42
    20.0
    6.5
    OIL BASED
    05.06.1989
    3625
    1.42
    25.0
    7.0
    OIL BASED
    05.06.1989
    3628
    1.53
    24.0
    9.5
    OIL BASED
    09.06.1989
    3730
    1.55
    24.0
    9.0
    OIL BASED
    12.06.1989
    3860
    1.57
    20.0
    10.0
    OIL BASED
    19.06.1989
    3942
    1.60
    28.0
    10.0
    OIL BASED
    20.06.1989

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.22