Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
08.10.2024 - 01:29
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/3-6

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/3-6
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/3-6
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LN0902:inline 2365 & crossline 7792
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Lundin Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1451-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    37
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    10.06.2013
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    16.07.2013
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    16.07.2015
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    13.08.2015
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    INTRA DRAUPNE FM SS
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    117.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2050.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2050.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    2.2
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    PRE-DEVONIAN
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BASEMENT
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 49' 7.86'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 42' 11.4'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6520069.07
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    482855.93
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7182
  • Wellbore history

    General
    Well 16/3-6 was drilled on the eastern part of the Johan Sverdrup Field on the Utsira High in the North Sea. The primary objective was to appraise the eastern part of the Johan Sverdrup Field between wells 16/2-13 S and 16/3-4. These two wells are located 5 km apart and found different Jurassic sequences and no oil water contact. Well 16/3-6 was drilled to determine which Jurassic sequences were present at this position as well as oil water contact, thickness of the sequences and depth to top reservoir.
    Operations and results
    A 9 7/8" pilot hole was drilled from seabed 706 m to check for shallow gas. No shallow gas was seen. Appraisal well 16/3-6 was spudded with the semi-submersible installation Bredford Dolphin on 10 June 2013 and drilled to TD at 2050 m in fractured granitic basement. No significant problem was encountered in the operations. The well was drilled with spud mud down to 698 m and with Performadril water based mud from 698 m to TD.
    Top Draupne Formation/BCU was encountered close to prognosis at 1924 m. A well-defined 15-meter thick Draupne Formation shale was penetrated above 24 meters of excellent quality Late Jurassic Intra-Draupne Formation sandstone. The Draupne Formation shales are of late Volgian to early Valanginian age. The Intra-Draupne Formation sandstones were encountered at 1939 m. They are of early Kimmeridgian to ?late Kimmeridgian/early Volgian age and rest directly on solid granitic basement rocks at 1964.5 m. No middle Jurassic sequence was present as in the neighbouring well 16/2-13 S. The oil water contact was established at 1951 m, 4 meters deeper than predicted. Oil shows were described in the interval from 1925 m in the Draupne shales to 1956 m, 5 m below the oil water contact; no other shows were described in the well.
    Two cores were cut from 1926 m in the Draupne Formation shale, through the Intra-Draupne Formation sandstone reservoir and down into the basement at 1968 m. The core recovery was close to 100% and the core-log shift was 1.2 m. Oil and water samples were acquired using SLB MDT tools. Oil samples were acquired at 1940.11 m, 1946.51 m and 1950.3 m. Water samples were acquired at 1952.9 m and 1962.5 m. The oil samples proved a GOR of ca 33 Sm3/Sm3, oil density of ca 0.892 g/cm3, and gas gravity of ca 1.06 (air = 1).
    The well was plugged and abandoned on 16 July 2013 as an oil appraisal.
    Testing
    The hole was perforated between 1952.2 m and 1956.2 m, and two Expro Cats wireless downhole gauges were installed at 1900.7 m and 1885.2 m to monitor reservoir pressure and temperature. The gauges have battery capacity to sample data for up to 5 years. No DST was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    710.00
    2050.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1926.0
    1953.2
    [m ]
    2
    1953.2
    1967.6
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    41.6
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Oil samples at the Norwegian Offshore Directorate

    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    MDT
    1950.30
    0.00
    OIL
    02.07.2013 - 00:00
    YES
    MDT
    1946.50
    0.00
    OIL
    02.07.2013 - 00:00
    NO
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    GR ADT CMR MDT FMI
    1940
    1963
    GR ADT HRLA FMI
    1890
    2000
    GR HNGS ECS PEX HRLA ADT
    1856
    2047
    GR MDT
    1940
    1962
    GR MDT
    1952
    1954
    GR MSIP PPC FMI
    1856
    2050
    GR VSP
    142
    2040
    GR XL ROCK
    0
    0
    GR XPT CMR
    1864
    2043
    MWD - GR PWD RES DIR DEN NEU SON
    145
    2036
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    220.0
    36
    222.0
    0.00
    SURF.COND.
    20
    691.0
    26
    698.0
    0.00
    PILOT HOLE
    706.0
    9 7/8
    706.0
    0.00
    INTERM.
    9 5/8
    1855.5
    12 1/4
    1864.0
    0.00
    LINER
    7
    2035.0
    8 1/2
    2050.0
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    142
    1.50
    14.0
    Water Based
    558
    1.40
    36.0
    Water Based
    706
    1.35
    28.0
    Water Based
    1864
    1.40
    38.0
    Water Based
    2050
    1.15
    35.0
    Water Based
    2050
    1.18
    33.0
    Water Based