Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
09.10.2024 - 01:29
Time of last synchronization with Norwegian Offshore Directorate's internal systems

34/8-16 S

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/8-16 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/8-16
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    ST10015T11B-KIR-PSTM-FULL inline 2103 & xline 2089
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Statoil Petroleum AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1602-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    49
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    28.09.2015
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    15.11.2015
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    15.11.2017
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    08.03.2018
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS/CONDENSATE
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE TRIASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    LUNDE FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    378.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3875.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3830.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    17.3
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    139
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    TEIST FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    61° 21' 48.9'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 36' 15.58'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6803512.21
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    478843.80
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7800
  • Wellbore history

    General
    Well 34/8-16 S was drilled to test the Tarvos and Iapetus East prospects, East of the Visund Field on Tampen Spur in the North Sea. Primary objective was to prove economical accumulation of gas and/or condensate in the Tarvos Lomvi Prospect (Lomvi Formation), and to encounter the gas-water contact. Secondary objective was to explore possible additional volumes in Iapetus East prospect (Brent and/or Statfjord) and Tarvos Lunde prospect (Lunde Formation).
    Operations and results
    Wildcat well 34/8-16 S was spudded with the semi-submersible installation Songa Trym on 28 September 2015 and drilled to TD at 3875 m (3830 m TVD) m in the Late Triassic Teist Formation. Operations proceeded without significant problems. The well was drilled with seawater and hi-vis pills down to 465 m , with Glydril mud from 465 to 1441 m, and with XP-07 oil-based mud from 1441 m to TD.
    Top of the upper target, the Iapetus prospect, was penetrated at 3115.5 m (3101.6 m TVD) and proved to be of Late Triassic age, Lunde Formation. This reservoir contained oil and gas-condensate down to a free-water level at ca 3205 m (3188 m TVD). Pressure data proved several pressure regimes within the hydrocarbon-bearing interval, with oil on top. The stratigraphically deeper Tarvos prospects were both water-filled. Oil shows, described with direct and cut fluorescence were described in sandstones in the intervals 3175 to 3270 m, 3312 to 3322 m, 3343 to 3408 m, and 3442 to 3469 m.
    Two cores were cut in the well. Core 1 was cut from 3173 to 3227 m with 98.9% recovery in the Lunde Formation. Core 2 was cut from 3542 to 3596 m with 99.6% recovery in the Lomvi Formation. MDT fluid samples were taken at 3117.9 m (Oil), 3133.5 m (gas), 3152.6 m (gas), and 3182.4 m (gas).
    The well was permanently abandoned on 15 November 2015 as a as an oil/condensate/gas discovery.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1450.00
    3875.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3173.0
    3226.4
    [m ]
    2
    3542.0
    3595.8
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    107.2
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    AIT LT PEX HNGS
    2951
    3878
    MDT CMR GR
    3106
    3841
    MDT GR
    3117
    3207
    MWD LWD - GR RES PRES DI
    465
    3875
    QGEO MSIP GR
    2455
    3878
    XLROCK GR
    3014
    3842
    ZO VSP GR
    432
    3865
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    465.8
    36
    465.8
    0.00
    SURF.COND.
    20
    1431.5
    26
    1441.0
    1.60
    FIT
    INTERM.
    9 5/8
    2953.0
    12 1/4
    2963.0
    1.82
    FIT
    3875.0
    8 1/2
    3875.0
    0.00
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    405
    1.35
    14.0
    SW/Polymer
    465
    1.60
    19.0
    Kill fluid
    488
    1.40
    16.0
    EMS 4400
    600
    1.33
    9.0
    EMS 4400
    600
    1.40
    9.0
    EMS 4400
    1094
    1.60
    15.0
    Kill Fluid- SW/Polymer
    1740
    1.41
    22.0
    EMS 4400
    2688
    1.49
    25.0
    EMS 4400
    2814
    1.51
    21.0
    EMS 4400
    2814
    1.65
    37.0
    EMS 4400
    2830
    1.50
    26.0
    EMS 4400
    2830
    1.43
    27.0
    EMS 4400
    2963
    1.55
    29.0
    EMS 4400
    2963
    1.50
    27.0
    EMS 4400
    3014
    1.65
    45.0
    EMS 4400
    3020
    1.60
    31.0
    EMS 4400
    3172
    1.62
    32.0
    EMS 4400
    3484
    1.62
    33.0
    EMS 4400
    3633
    1.63
    36.0
    EMS 4400
    3633
    1.62
    33.0
    EMS 4400
    3757
    1.63
    38.0
    EMS 4400
    3875
    1.65
    42.0
    EMS 4400
    3875
    1.63
    41.0
    EMS 4400