Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
22.12.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6507/3-7

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6507/3-7
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6507/3-7
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    BPN0501-innline1001 & crossline 613
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    StatoilHydro Petroleum AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1250-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    51
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    02.06.2009
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    22.07.2009
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    22.07.2011
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    22.07.2011
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    FANGST GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    22.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    377.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3855.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3854.5
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    3.47
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    145
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ÅRE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    65° 49' 24.3'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    7° 43' 8.1'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7301009.43
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    441454.51
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    6123

  • Wellbore history
    General
    Well 6507/3-7 Idun Nord was drilled on the Eastern side of the Dønna Terrace in the Norwegian Sea, just north of the 6507/3-3 Idun Discovery. The main objective of the well was to prove hydrocarbons in the Middle Jurassic Fangst Group (Garn, Not and Ile Formation sandstones) and in the Early Jurassic Båt Group (Tilje and Åre Formation sandstones). A secondary target for the well was to test the hydrocarbon potential of the Cretaceous Intra Lange Formation sandstones.
    Operations and results
    Prior to spudding the main well, a 9 7/8" pilot hole 6507/3-U-2 was drilled approximately 15m east of this main wellbore 6507/3-7 location, to check for presence of shallow gas. No shallow gas was observed by the ROV at the wellhead and there were no indication on LWD, but the LWD confirmed thin water filled sands at 578 m, 648 m, 791 m, and 1142 m. Wildcat well 6507/3-7 was spudded with the semi-submersible installation Ocean Vanguard on 2 June 2009 and drilled to TD at 3855 m in the Early Jurassic Åre Formation. No LWD logs were run in the 36" and 26" sections of the main well bore. After drilling 3.5 m of the 8 1/2" section below the 9 5/8" shoe, a kick occurred. The pore pressure prognosis indicated 1.09 g/cm3 at top of the reservoir. The shut in well pressure estimated a pore pressure of 1.39 g/cm3. The kick was circulated out by driller's method and the mud weight increased from 1.25 g/cm3 to 1.45 g/cm3. The well was drilled with spud mud and hi-vis sweeps down to 1203 m, with Performadrill WBM from 1203 m to 2205 m, with Enviromul OBM (yellow class) from 2205 m to 3540 m, and with Performadrill WBM from 3540 m to TD.
    6507/3-7 penetrated rocks of Quaternary, Tertiary, Cretaceous and Jurassic age. Top Garn Formation was encountered at 3545 m, top Not Formation at 3580 m, while the Early Jurassic Tilje Formation was encountered at 3687 m. The presence of gas bearing sandstones was proven in the Garn and Not Formations. The reservoir permeability ranged from 1240 md in Garn Formation to 1 - 7 md in Not Formation. The porosity in the Garn Formation was 16 - 20 %, while in the Not Formatio it was 12 - 19 %. No gas/water contact was proven in the well, but from logs and formation pressure there is gas down to at least 3597 m and water up to at least 3622 m. The only significant shows in the well were seen on the cores from the reservoir. Apart from elevated gas readings and a minor show on one cutting sample from 2904 m no hydrocarbon indications were seen in the secondary target Lange Formation sandstones.
    Two cores were cut. Core one was cut at 3546 - 3600 m (3546 m - 3601.4 m is marked depth on the core) in the Garn and Not Formations, core 2 was cut at 3600 ? 3654 m (3601.4 m - 3654 m is marked depth on the core) in the Not, Ile and Ror Formations. MDT fluid samples were taken at 3546.5 m in the Garn Formation (gas), at 3596 m in the Not Formation (gas and water), and at 3702 m in the Tilje Formation (water). Pressure points were taken in Garn, Not, Ile, Ror, Tilje and Åre. There is a 1 m difference between MWD/LWD depth and wire line logging depth in the 8 1/2" section.
    The well was permanently abandoned on 22 July 2009 as a gas discovery.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1210.00
    3855.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3546.0
    3601.4
    [m ]
    2
    3601.4
    3653.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    107.0
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CMR ECS
    3541
    3854
    FMI PPC MSIP PPC
    3541
    3855
    HRLA PEX HNGS
    3541
    3855
    MDT PACKER
    3605
    3632
    MDT PRE
    3546
    3832
    MWD LWD - PP
    399
    463
    MWD LWD - PP ARCRES
    399
    1205
    MWD LWD - PP ARCRES
    463
    2205
    MWD LWD - PP ARCRES GVR
    2205
    3855
    VSP
    891
    3848

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    459.0
    36
    463.0
    0.00
    LOT
    SURF.COND.
    20
    1198.0
    26
    1203.0
    1.54
    LOT
    INTERM.
    13 3/8
    2200.0
    17 1/2
    2205.0
    1.87
    LOT
    INTERM.
    9 5/8
    3539.0
    12 1/4
    3540.0
    2.00
    LOT
    OPEN HOLE
    3855.0
    8 1/2
    3855.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    1203
    1.26
    35.0
    Performadril
    1544
    1.37
    39.0
    Performadril
    1730
    1.37
    44.0
    Performadril
    1900
    1.48
    51.0
    Performadril
    2025
    1.45
    25.0
    Spud Mud
    2068
    1.48
    41.0
    Performadril
    2205
    1.50
    36.0
    Performadril
    2705
    1.47
    26.0
    Spud Mud
    3215
    1.56
    36.0
    Enviromul Yellow
    3540
    1.25
    20.0
    Performadril
    3540
    1.56
    34.0
    Enviromul Yellow
    3600
    1.45
    23.0
    Performadril
    3654
    1.45
    23.0
    Performadril
    3855
    1.45
    26.0
    Performadril

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    PDF
    0.28