Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
16.07.2024 - 01:28
Time of last synchronization with Norwegian Offshore Directorate's internal systems

30/6-2

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/6-2
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/6-2
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    Line 703. 125. SP643
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Den norske stats oljeselskap a.s
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    225-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    78
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    24.09.1979
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    11.12.1979
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    11.12.1981
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    08.12.2015
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    BRENT GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    106.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2890.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2889.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    2.5
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    78
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    HEGRE GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    60° 32' 12.16'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 46' 11.11'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6711366.11
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    487365.31
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    381
  • Wellbore history

    General
    Well 30/6-2 was drilled to appraise the 30/6-1 Oseberg discovery. Well 30/6-1 found gas in the Brent Group and water-filled reservoirs in the Dunlin and Statfjord groups. The primary objectives were to test the Dunlin and Statfjord sandstones in a structurally higher setting on the Oseberg Alpha structure. Secondary objective was appraisal of the Brent Group hydrocarbons.
    Operations and results
    Appraisal well 30/6-2 was spudded with the semi-submersible installation Deepsea Saga on 24 September 1979 and drilled to TD at 2890 m in the Triassic Hegre Group. Tight hole became a serious problem at 1313 m. This was cured with salt water and diesel addition. Five days were counted as non-productive due to bad weather and fishing for lost objects in hole. The well was drilled with spud mud down to 736 m, and with Chromium-Lignosulphonate/bentonite mud from 736 m to TD. After the diesel addition at 1313 m the mud contained 8% diesel. The diesel content became slowly diluted to 0.25% at TD.
    The Brent Group was penetrated from 2191 to 2237. It is 46 m thick and gas bearing. The hydrocarbon/water contact was not seen in the well. The underlying Dunlin and Statfjord groups were both water bearing. Oil shows were described on cuttings and 39% water saturation was calculated, from top Brent and all through the Shetland Group up to 2165 m. Further oil shows on cuttings and core were described at 1945 to 1955 m in the Balder Formation, on cores and cuttings in the Dunlin Group, and on the Statfjord core.
    A total of seven cores were recovered in the interval from 2202 to 2238.5 m in the Brent Group, 2435 m to 2437.5 m, and 2444.5 to 2454.5 m in the Dunlin Group, and 2571 to 2577 m in the top of the Statfjord Group. An RFT gas sample was taken at 2222.3 m.
    The well was permanently abandoned on 11 December as a gas/condensate appraisal well.
    Testing
    A drill stem test was performed from the interval 2212 to 2222 m.
    The test produced 722000 Sm3 gas and 212 Sm3 oil /day through a 1" choke. The GOR was 3400 Sm3/Sm3, the oil gravity was 59 °API, and the gas gravity was 0.66 (air = 1). Water, sand or H2S were not observed, but 0.3 - 0.6% CO2 was recorded.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    180.00
    2890.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2202.0
    2205.2
    [m ]
    2
    2205.5
    2209.3
    [m ]
    3
    2210.0
    2227.5
    [m ]
    4
    2227.5
    2237.8
    [m ]
    5
    2435.0
    2437.5
    [m ]
    6
    2444.5
    2452.3
    [m ]
    7
    2571.0
    2577.2
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    51.3
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Core photos

    Core photos
    Core photo at depth: 2202-2204m
    Core photo at depth: 2204-2205m
    Core photo at depth: 2205-2208m
    Core photo at depth: 2208-2209m
    Core photo at depth: 2210-2212m
    2202-2204m
    2204-2205m
    2205-2208m
    2208-2209m
    2210-2212m
    Core photo at depth: 2212-2215m
    Core photo at depth: 2215-2218m
    Core photo at depth: 2218-2220m
    Core photo at depth: 2220-2223m
    Core photo at depth: 2223-2226m
    2212-2215m
    2215-2218m
    2218-2220m
    2220-2223m
    2223-2226m
    Core photo at depth: 2226-2227m
    Core photo at depth: 2227-2230m
    Core photo at depth: 2230-2232m
    Core photo at depth: 2232-2235m
    Core photo at depth: 2235-2237m
    2226-2227m
    2227-2230m
    2230-2232m
    2232-2235m
    2235-2237m
    Core photo at depth: 2435-2437m
    Core photo at depth: 2444-2447m
    Core photo at depth: 2447-2449m
    Core photo at depth: 2449-2452m
    Core photo at depth: 2571-2573m
    2435-2437m
    2444-2447m
    2447-2449m
    2449-2452m
    2571-2573m
    Core photo at depth: 2573-2576m
    Core photo at depth: 2576-2577m
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    2573-2576m
    2576-2577m
  • Palynological slides at the Norwegian Offshore Directorate

    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    8100.0
    [ft]
    C
    8200.0
    [ft]
    DC
    8300.0
    [ft]
    DC
    8400.0
    [ft]
    DC
    8500.0
    [ft]
    DC
    8600.0
    [ft]
    DC
    8700.0
    [ft]
    DC
    8800.0
    [ft]
    DC
    10760.0
    [ft]
    DC
    10860.0
    [ft]
    DC
    10950.0
    [ft]
    DC
    11060.0
    [ft]
    DC
    11160.0
    [ft]
    DC
    11250.0
    [ft]
    DC
    11360.0
    [ft]
    DC
    11460.0
    [ft]
    DC
    11500.0
    [ft]
    DC
    11540.0
    [ft]
    DC
    11600.0
    [ft]
    DC
    11700.0
    [ft]
    DC
    11800.0
    [ft]
    DC
    11900.0
    [ft]
    DC
    12000.0
    [ft]
    DC
    12110.0
    [ft]
    DC
    12200.0
    [ft]
    DC
    12300.0
    [ft]
    DC
    12390.0
    [ft]
    DC
    12490.0
    [ft]
    DC
    12600.0
    [ft]
    DC
    12690.0
    [ft]
    DC
    12790.0
    [ft]
    DC
  • Oil samples at the Norwegian Offshore Directorate

    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    DST1A
    2212.00
    2222.00
    CONDENSATE
    01.12.1979 - 00:00
    YES
  • Lithostratigraphy

  • Geochemical information

    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    0.84
    pdf
    0.85
  • Documents – reported by the production licence (period for duty of secrecy expired)

    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    29.34
  • Drill stem tests (DST)

    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    2212
    2222
    19.1
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    191
    646000
    0.740
    0.650
    3397
  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CBL GR
    280
    2378
    DLL MSFL GR
    1702
    2885
    FDC CNL GR CAL
    1702
    2886
    FDC GR CAL
    900
    1713
    HDT
    1702
    2886
    ISF SON GR SP
    125
    2885
    VELOCITY
    655
    2880
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    177.0
    36
    178.5
    0.00
    LOT
    SURF.COND.
    20
    901.0
    26
    915.0
    1.80
    LOT
    INTERM.
    13 3/8
    1704.0
    17 1/2
    1715.0
    1.74
    LOT
    INTERM.
    9 5/8
    2389.0
    12 1/4
    2400.0
    1.76
    LOT
    OPEN HOLE
    2890.0
    8 1/2
    2890.0
    0.00
    LOT
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    480
    1.10
    44.0
    waterbased
    880
    1.06
    39.0
    waterbased
    925
    1.10
    50.0
    waterbased
    1085
    1.12
    42.0
    waterbased
    1375
    1.30
    waterbased
    1560
    1.35
    waterbased
    1715
    1.40
    waterbased
    1980
    1.50
    waterbased
    2400
    1.34
    waterbased
    2442
    1.35
    53.0
    waterbased