Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
21.11.2024 - 01:28
Time of last synchronization with Norwegian Offshore Directorate's internal systems

7120/12-5

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7120/12-5
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    BARENTS SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    7120/12-5
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    ST07M10 inline 3466 & crossline 8781
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Eni Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1326-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    79
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    17.10.2010
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    03.01.2011
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    03.01.2013
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    15.01.2013
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    23.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    187.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3630.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3628.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    11.89
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    KOBBE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    71° 11' 57.92'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    20° 54' 54.97'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7899853.81
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    496952.15
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    34
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    6478

  • Wellbore history
    General
    Well 7120/12-5 was drilled on the Lunde prospect next to the 7120/12-3Alke North discovery in the Hammerfest Basin of the Barents Sea. The main targets were the Stø Formation sandstones in the top of the Kapp Toscana Group, Intra Carnian sandstones of the Snadd Formation and Kobbe Formation sandstones. These formations were expected to be gas bearing.
    Operations and results
    Wildcat well 7120/12-5 was drilled with the semi-submersible installation Polar Pioneer. Drilling started on 3 January 2010 with a 9 7/8" pilot hole 51.5 m from the main well position to check for shallow gas. No shallow gas was observed. The rig was then moved to the planned position, where it was spudded and drilling commenced to 1761 m where the initial 16" hole was abandoned owing to hole instability. A new 16" hole was sidetracked from 533 m and drilling then proceeded without significant problems to final TD at 3630 m in the Middle Triassic Kobbe Formation. The well was drilled with Seawater and hi-vis sweeps down to 510 m, with K-Format mud from 510 m to 1761 m in the primary well bore and to 1591 m in sidetrack, and with KCl/GEM/Polymer mud from 1591 m to TD.
    Sandstones of reservoir quality were penetrated in all three targets, but all were found to be water wet. Based on 12 valid XPT-MDT pressure points a water gradient of 0.101 bar/m was established from the Stø Formation at 2150 m to the Snadd Fm (Intra Carnian sand) at 3100 m. The Stø Formation was encountered at 2165 m, 26.5 m higher than originally prognosed. The Stø sandstones were generally very fine to fine, well sorted and poorly cemented with occasional kaolinite matrix. Top Snadd Formation was encountered at 2582 m with the secondary target Intra Carnian sandstones at 3175 to 3197.5 m, 163m deeper than prognosed. These sands were interbedded with thin siltstones and were generally fine to medium grained, well sorted, poorly cemented with moderate inferred porosity. The Kobbe Formation came in at 3572 m, 163 m deeper than prognosed. The Kobbe sandstones were interbedded with claystone and were very fine to occasionally fine, well sorted and commonly well cemented with poor inferred porosity.
    Shows were absent from the well apart from background mineral fluorescence. Low gas values were recorded throughout the well with the highest, short lived peak of 10.45% recorded on penetrating the Stø sandstones. After the initial peak gas values rapidly fell back to background levels below 1%.
    No cores were cut and no wire line fluid samples were taken.
    The well was permanently abandoned on 3 January 2011 as a dry well.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    510.00
    3630.00

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    GR DENS NEU SON
    1576
    3164
    MSCT GR
    3177
    3608
    MWD - ARC SON TELE
    210
    570
    MWD - DVRARC
    1591
    3164
    MWD - PDX5 RAB6 TELE
    3294
    3630
    MWD - PP ARC
    570
    1591
    MWD - RAB6 DV6MT TELE
    3164
    3294
    VSP GR
    1986
    3620
    XPT GR
    3177
    3191
    XPT TLD MAIP
    3070
    3634

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    268.5
    36
    268.5
    0.00
    LOT
    SURF.COND.
    20
    503.0
    26
    510.0
    1.79
    LOT
    PILOT HOLE
    510.0
    9 7/8
    510.0
    0.00
    LOT
    INTERM.
    13 3/8
    1576.0
    16
    1591.0
    1.66
    LOT
    INTERM.
    9 5/8
    3154.0
    12 1/4
    3164.0
    0.00
    LOT
    OPEN HOLE
    3630.0
    8 1/2
    3630.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    450
    1.33
    23.0
    KF
    935
    1.33
    22.0
    KF
    1106
    1.25
    16.0
    KF
    1390
    1.36
    20.0
    KF
    1591
    1.37
    20.0
    KF
    1596
    1.37
    19.0
    KC
    1761
    1.29
    21.0
    KF
    1800
    1.37
    21.0
    KC
    2930
    1.39
    1.0
    KC
    3294
    1.54
    30.0
    KC
    3360
    1.52
    23.0
    KC
    3630
    1.52
    22.0
    KC

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.28