Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
01.12.2024 - 01:27
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6507/7-12

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6507/7-12
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6507/7-12
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    INLINE 1572 X-LINE 1670
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Conoco Norway Inc.
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    963-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    27
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    17.07.1999
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    12.08.1999
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    12.08.2001
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    11.04.2003
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL SHOWS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    23.2
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    333.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3976.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3974.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    8.2
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    128
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SPEKK FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    65° 26' 46.16'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    7° 18' 17.82'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7259419.31
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    421406.23
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    3812
  • Wellbore history

    General
    Exploration well 6507/7-12 is located in the northern part of the Haltenbanken area, approximately 190 nautical miles west of the Norwegian coast. The block lies on the western flank of a series of NNE-SSW faults, which separate the Dønna Terrace from the Nordland Ridge/Trøndelag Platform to the east. The prospect is in the northern part of block 6507/7 and lies in an Early Cretaceous mini-basin developed in the hanging wall of the Revfallet Fault complex. The well was drilled to test a stratigraphic closure in an anticipated sand prone wedge of Albian age (Lower Cretaceous). The well was drilled in a location planned to test the minimum economic field size in terms of a tie-back to the Heidrun TLP. If hydrocarbons were present, the well would be tested through wire line logging and possible DST to determine hydrocarbon phase and deliverability. Secondary targets were in the Aptian, "Lange B" sands and in the Lysing Formation, also to be evaluated by drilling and wire line logging. Planned total depth for the well was ca. 20 meters into the Upper Jurassic Spekk Formation, prognosed at 3908 m RKB.
    Operations and results
    Exploration well 6507/7-12 was spudded on 17 July 1999 with the semi-submersible installation, "Mærsk Jutlander" and drilled to TD at 3976 m in the Late Jurassic Spekk Formation. The well was drilled with seawater and high viscosity sweeps down to 1316 m, with "BARASILC" water based silicate KCl mud from 1316 m to 2508 m, and with Baroid "Environmul& oil based mud from 2508 m to TD. Porous sands were encountered at all prospective intervals, at depths 70-80 m deeper than prognosed. The wedges previously believed to be of Albian and Aptian were found to be of Aptian and Barremian age, respectively, and sand thickness within the wedges were thinner than anticipated. Oil (3.88 m "net pay" based on wire line data) was found in the Aptian sandstones. However, it was not a commercial success due to lack of permeability, identified from MDT pressure tests. Thin-section analysis from sidewall cores confirmed lack of permeability. Log data showed that shales in this section have totally different acoustic properties than shales above and could be confused with sand. Oil shows in the Early Cretaceous porous zones were mainly faint and weak based on fluorescence cut using acetone as solvent. The secondary objective in Lysing Formation was a 40 m sand with both porosity and permeability, but was drilled outside closure and was clearly water wet. A MDT water sample from Lysing sandstone was taken with a one-gallon chamber at a depth of 2869.8 m MD. The filling was aborted after 2,5 litres due to slow flow of water. Later analysis showed the sample to be contaminated by mud filtrate and with no oil content. Some CO2 and methane-gas were reported from the sample. No conventional cores were cut. The well was permanently plugged and abandoned as a dry well with oil shows on 12 August 1999.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1330.00
    3975.00
  • Palynological slides at the Norwegian Offshore Directorate

    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    1330.0
    [m]
    DC
    RRI
    1360.0
    [m]
    DC
    RRI
    1390.0
    [m]
    DC
    RRI
    1420.0
    [m]
    DC
    RRI
    1450.0
    [m]
    DC
    RRI
    1480.0
    [m]
    DC
    RRI
    1510.0
    [m]
    DC
    RRI
    1540.0
    [m]
    DC
    RRI
    1570.0
    [m]
    DC
    RRI
    1610.0
    [m]
    DC
    RRI
    1630.0
    [m]
    DC
    RRI
    1660.0
    [m]
    DC
    RRI
    1690.0
    [m]
    DC
    RRI
    1720.0
    [m]
    DC
    RRI
    1750.0
    [m]
    DC
    RRI
    1780.0
    [m]
    DC
    RRI
    1810.0
    [m]
    DC
    RRI
    1840.0
    [m]
    DC
    RRI
    1870.0
    [m]
    DC
    RRI
    1890.0
    [m]
    DC
    RRI
    1930.0
    [m]
    DC
    RRI
    1960.0
    [m]
    DC
    RRI
    1990.0
    [m]
    DC
    RRI
    2020.0
    [m]
    DC
    RRI
    2050.0
    [m]
    DC
    RRI
    2080.0
    [m]
    DC
    RRI
    2110.0
    [m]
    DC
    RRI
    2120.0
    [m]
    DC
    RRI
    2130.0
    [m]
    DC
    RRI
    2140.0
    [m]
    DC
    RRI
    2150.0
    [m]
    DC
    RRI
    2160.0
    [m]
    DC
    RRI
    2170.0
    [m]
    DC
    RRI
    2180.0
    [m]
    DC
    RRI
    2190.0
    [m]
    DC
    RRI
    2200.0
    [m]
    DC
    RRI
    2210.0
    [m]
    DC
    RRI
    2220.0
    [m]
    DC
    RRI
    2230.0
    [m]
    DC
    RRI
    2240.0
    [m]
    DC
    RRI
    2250.0
    [m]
    DC
    RRI
    2260.0
    [m]
    DC
    RRI
    2270.0
    [m]
    DC
    RRI
    2280.0
    [m]
    DC
    RRI
    2290.0
    [m]
    DC
    RRI
    2300.0
    [m]
    DC
    RRI
    2310.0
    [m]
    DC
    RRI
    2320.0
    [m]
    DC
    RRI
    2330.0
    [m]
    DC
    RRI
    2360.0
    [m]
    DC
    RRI
    2370.0
    [m]
    DC
    RRI
    2400.0
    [m]
    DC
    RRI
    2410.0
    [m]
    DC
    RRI
    2420.0
    [m]
    DC
    RRI
    2430.0
    [m]
    DC
    RRI
    2440.0
    [m]
    DC
    RRI
    2460.0
    [m]
    DC
    RRI
    2480.0
    [m]
    DC
    RRI
    2490.0
    [m]
    DC
    RRI
    2500.0
    [m]
    DC
    RRI
    2508.0
    [m]
    DC
    RRI
    2520.0
    [m]
    DC
    RRI
    2530.0
    [m]
    DC
    RRI
    2540.0
    [m]
    DC
    RRI
    2550.0
    [m]
    DC
    RRI
    2560.0
    [m]
    DC
    RRI
    2570.0
    [m]
    DC
    RRI
    2580.0
    [m]
    DC
    RRI
    2590.0
    [m]
    DC
    RRI
    2600.0
    [m]
    DC
    RRI
    2610.0
    [m]
    DC
    RRI
    2620.0
    [m]
    DC
    RRI
    2624.0
    [m]
    DC
    RRI
    2630.0
    [m]
    DC
    RRI
    2650.0
    [m]
    DC
    RRI
    2660.0
    [m]
    DC
    RRI
    2670.0
    [m]
    DC
    RRI
    2680.0
    [m]
    DC
    RRI
    2690.0
    [m]
    DC
    RRI
    2700.0
    [m]
    DC
    RRI
    2710.0
    [m]
    DC
    RRI
    2720.0
    [m]
    DC
    RRI
    2730.0
    [m]
    DC
    RRI
    2740.0
    [m]
    DC
    RRI
    2750.0
    [m]
    DC
    RRI
    2760.0
    [m]
    DC
    RRI
    2770.0
    [m]
    DC
    RRI
    2780.0
    [m]
    DC
    RRI
    2790.0
    [m]
    DC
    RRI
    2800.0
    [m]
    DC
    RRI
    2810.0
    [m]
    DC
    RRI
    2820.0
    [m]
    DC
    RRI
    2825.0
    [m]
    DC
    RRI
    2840.0
    [m]
    DC
    RRI
    2850.0
    [m]
    DC
    RRI
    2860.0
    [m]
    DC
    RRI
    2870.0
    [m]
    DC
    RRI
    2890.0
    [m]
    DC
    RRI
    2900.0
    [m]
    DC
    RRI
    2910.0
    [m]
    DC
    RRI
    2920.0
    [m]
    DC
    RRI
    2930.0
    [m]
    DC
    RRI
    2940.0
    [m]
    DC
    RRI
    2950.0
    [m]
    DC
    RRI
    2960.0
    [m]
    DC
    RRI
    2970.0
    [m]
    DC
    RRI
    2980.0
    [m]
    DC
    RRI
    2990.0
    [m]
    DC
    RRI
    3000.0
    [m]
    DC
    RRI
    3010.0
    [m]
    DC
    RRI
    3020.0
    [m]
    DC
    RRI
    3030.0
    [m]
    DC
    RRI
    3040.0
    [m]
    DC
    RRI
    3055.0
    [m]
    DC
    RRI
    3060.0
    [m]
    DC
    RRI
    3070.0
    [m]
    DC
    RRI
    3080.0
    [m]
    DC
    RRI
    3090.0
    [m]
    DC
    RRI
    3100.0
    [m]
    DC
    RRI
    3110.0
    [m]
    DC
    RRI
    3120.0
    [m]
    DC
    RRI
    3130.0
    [m]
    DC
    RRI
    3140.0
    [m]
    DC
    RRI
    3150.0
    [m]
    DC
    RRI
    3160.0
    [m]
    DC
    RRI
    3170.0
    [m]
    DC
    RRI
    3180.0
    [m]
    DC
    RRI
    3190.0
    [m]
    DC
    RRI
    3200.0
    [m]
    DC
    RRI
    3210.0
    [m]
    DC
    RRI
    3220.0
    [m]
    DC
    RRI
    3230.0
    [m]
    DC
    RRI
    3240.0
    [m]
    DC
    RRI
    3250.0
    [m]
    DC
    RRI
    3260.0
    [m]
    DC
    RRI
    3270.0
    [m]
    DC
    RRI
    3280.0
    [m]
    DC
    RRI
    3290.0
    [m]
    DC
    RRI
    3300.0
    [m]
    DC
    RRI
    3310.0
    [m]
    DC
    RRI
    3320.0
    [m]
    DC
    RRI
    3330.0
    [m]
    DC
    RRI
    3340.0
    [m]
    DC
    RRI
    3345.0
    [m]
    DC
    RRI
    3360.0
    [m]
    DC
    RRI
    3370.0
    [m]
    DC
    RRI
    3380.0
    [m]
    DC
    RRI
    3390.0
    [m]
    DC
    RRI
    3400.0
    [m]
    DC
    RRI
    3410.0
    [m]
    DC
    RRI
    3420.0
    [m]
    DC
    RRI
    3430.0
    [m]
    DC
    RRI
    3440.0
    [m]
    DC
    RRI
    3450.0
    [m]
    DC
    RRI
    3460.0
    [m]
    DC
    RRI
    3470.0
    [m]
    DC
    RRI
    3480.0
    [m]
    DC
    RRI
    3490.0
    [m]
    DC
    RRI
    3500.0
    [m]
    DC
    RRI
    3510.0
    [m]
    DC
    RRI
    3518.0
    [m]
    SWC
    RRI
    3530.0
    [m]
    DC
    RRI
    3540.0
    [m]
    DC
    RRI
    3549.0
    [m]
    SWC
    RRI
    3560.0
    [m]
    DC
    RRI
    3570.0
    [m]
    DC
    RRI
    3580.0
    [m]
    DC
    RRI
    3590.0
    [m]
    DC
    RRI
    3600.0
    [m]
    DC
    RRI
    3610.0
    [m]
    DC
    RRI
    3620.0
    [m]
    DC
    RRI
    3640.0
    [m]
    DC
    RRI
    3650.0
    [m]
    DC
    RRI
    3664.0
    [m]
    SWC
    RRI
    3670.0
    [m]
    DC
    RRI
    3680.0
    [m]
    SWC
    RRI
    3686.5
    [m]
    SWC
    RRI
    3693.5
    [m]
    SWC
    RRI
    3700.0
    [m]
    DC
    RRI
    3710.0
    [m]
    DC
    RRI
    3720.0
    [m]
    DC
    RRI
    3730.0
    [m]
    DC
    RRI
    3744.5
    [m]
    SWC
    RRI
    3750.0
    [m]
    DC
    RRI
    3759.0
    [m]
    SWC
    RRI
    3770.0
    [m]
    DC
    RRI
    3780.0
    [m]
    DC
    RRI
    3790.0
    [m]
    DC
    RRI
    3799.5
    [m]
    SWC
    RRI
    3810.0
    [m]
    DC
    RRI
    3820.0
    [m]
    DC
    RRI
    3826.0
    [m]
    SWC
    RRI
    3840.0
    [m]
    DC
    RRI
    3853.5
    [m]
    SWC
    RRI
    3865.0
    [m]
    SWC
    RRI
    3880.0
    [m]
    DC
    RRI
    3890.0
    [m]
    DC
    RRI
    3900.0
    [m]
    DC
    RRI
    3910.0
    [m]
    DC
    RRI
    3925.0
    [m]
    DC
    RRI
    3932.0
    [m]
    SWC
    RRI
    3940.0
    [m]
    DC
    RRI
    3950.0
    [m]
    DC
    RRI
    3960.0
    [m]
    DC
    RRI
    3970.0
    [m]
    DC
    RRI
    3975.0
    [m]
    DC
    RRI
  • Lithostratigraphy

  • Composite logs

    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.49
  • Documents – reported by the production licence (period for duty of secrecy expired)

    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    .pdf
    2.71
    .pdf
    45.65
  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    AIT IPLT DSI ACTS
    2441
    3948
    CST GR
    2788
    3967
    MDT GR
    2870
    3950
    MWD - CDR GR DIR
    409
    3976
    MWD - CDR GR DIR
    2500
    2508
    VSP
    1100
    3830
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    415.0
    36
    516.0
    0.00
    LOT
    SURF.COND.
    13 3/8
    1308.0
    17 1/2
    1308.0
    1.71
    LOT
    INTERM.
    9 5/8
    2500.0
    12 1/4
    2500.0
    1.92
    LOT
    OPEN HOLE
    3976.0
    8 1/2
    3976.0
    0.00
    LOT
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    409
    1.03
    SEAWATER
    1316
    1.20
    1.0
    SEAWATER
    1325
    1.53
    26.0
    KCL/POLYMER
    1740
    1.54
    23.0
    BARASIL-S
    2075
    1.54
    24.0
    BARASIL-S
    2508
    1.54
    27.0
    BARASIL-S
    2845
    1.54
    36.0
    OIL (ENVIRON)
    3192
    1.54
    45.0
    OIL (ENVIRON)
    3510
    1.54
    45.0
    OIL (ENVIRON)
    3726
    1.57
    44.0
    OIL (ENVIRON)
    3813
    1.57
    40.0
    OIL (ENVIRON)
    3875
    1.57
    40.0
    OIL (ENVIRON)
    3976
    1.57
    13.0
    KCL/POLYMER
  • Pressure plots

    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.28