Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
21.11.2024 - 01:28
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6407/10-5

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6407/10-5
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6407/10-5
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    DN0902 inline 2115 & xline 3333
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    A/S Norske Shell
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1592-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    25
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    25.08.2015
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    18.09.2015
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    18.09.2017
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    18.09.2017
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    40.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    336.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2890.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2889.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    3.9
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    INTRA MELKE FM SS
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    64° 12' 41.65'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    7° 16' 34.29'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7121899.98
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    416326.48
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7763

  • Wellbore history
    General
    Well 6407/10-5 was drilled to test the Portrush prospect, southeast of the Njord Field, in the southern part of the Halten Terrace in the Norwegian Sea. The primary objective was to prove oil in the Late Jurassic sequence (Rogn Formation) in a hanging wall trap downthrown of the Vingleia Fault Complex. The secondary objective was to evaluate potential intra-Melke Formation reservoirs.
    Operations and results
    Wildcat well 6407/10-5 was spudded with the semi-submersible installation Transocean Barents on 25 August 2015 and drilled to TD at 2890 m in the Late Jurassic Intra Melke Formation Sandstone. A 9 7/8" shallow gas pilot hole was drilled to 452 m. No shallow gas was seen. No significant problem was encountered in the operations. The well was drilled with Seawater and bentonite spud mud down to 452 m, with Seawater/KCl mud from 452 m to 1104 m and with Innovert NS Oil based mud from 1104 m to TD.
    A water bearing intra-Lange Formation was penetrated at 2460 m. Top Spekk Formation was encountered at 2518 m. Geochemical analyses show that Spekk Formation is immature and comparatively lean in well position with TOC not more than 2.5 %wt. Top Melke Formation was penetrated at 2646. The Melke Formation contain two sandstones in the intervals 2660 to 2694 m and 2789 m to TD. The two are separated by red-brown coloured claystone. MWD logs and MDT pressure points confirm that all Jurassic reservoirs are water bearing. No definitive hydrocarbon fluorescence was noted throughout the entire well that was distinguishable from oil based mud and mineral fluorescence.
    No cores were cut. The MDT was run on wireline for pressure points, but no fluid sample was taken. The aquifer pressure trend in the Rogn and upper part of the Melke shows 56 bar overpressure to the hydrostatic. Pressure points in the lower part of the Melke are approximately two bar above the Rogn/upper Melke water gradient
    The well was permanently abandoned on 18 September 2015 as a dry well.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1110.00
    2890.90

  • Palynological slides at the Norwegian Offshore Directorate
    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    1110.0
    [m]
    DC
    PETROSTR
    1130.0
    [m]
    DC
    PETROS
    1150.0
    [m]
    DC
    PETROS
    1170.0
    [m]
    DC
    PETROS
    1190.0
    [m]
    DC
    PETROS
    1210.0
    [m]
    DC
    PETROS
    1230.0
    [m]
    DC
    PETROS
    1250.0
    [m]
    DC
    PETROS
    1270.0
    [m]
    DC
    PETROS
    1290.0
    [m]
    DC
    PETROS
    1310.0
    [m]
    DC
    PETROS
    1330.0
    [m]
    DC
    PETROS
    1350.0
    [m]
    DC
    PETROS
    1370.0
    [m]
    DC
    PETROS
    1390.0
    [m]
    DC
    PETROS
    1410.0
    [m]
    DC
    PETROS
    1430.0
    [m]
    DC
    PETROS
    1460.0
    [m]
    DC
    PETROS
    1480.0
    [m]
    DC
    PETROS
    1500.0
    [m]
    DC
    PETROS
    1520.0
    [m]
    DC
    PETROS
    1530.0
    [m]
    DC
    PETROS
    1540.0
    [m]
    DC
    PETROS
    1550.0
    [m]
    DC
    PETROS
    1560.0
    [m]
    DC
    PETROS
    1570.0
    [m]
    DC
    PETROS
    1590.0
    [m]
    DC
    PETROS
    1610.0
    [m]
    DC
    PETROS
    1630.0
    [m]
    DC
    PETROS
    1650.0
    [m]
    DC
    PETROS
    1670.0
    [m]
    DC
    PETROS
    1690.0
    [m]
    DC
    PETROS
    1700.0
    [m]
    DC
    PETROS
    1710.0
    [m]
    DC
    PETROS
    1720.0
    [m]
    DC
    PETROS
    1730.0
    [m]
    DC
    PETROS
    1740.0
    [m]
    DC
    PETROS
    1750.0
    [m]
    DC
    PETROS
    1760.0
    [m]
    DC
    PETROS
    1770.0
    [m]
    DC
    PETROS
    1780.0
    [m]
    DC
    PETROS
    1790.0
    [m]
    DC
    PETROS
    1800.0
    [m]
    DC
    PETROS
    1810.0
    [m]
    DC
    PETROS
    1820.0
    [m]
    DC
    PETROS
    1830.0
    [m]
    DC
    PETROS
    1840.0
    [m]
    DC
    PETROS
    1850.0
    [m]
    DC
    PETROS
    1870.0
    [m]
    DC
    PETROS
    1890.0
    [m]
    DC
    PETROS
    1910.0
    [m]
    DC
    PETROS
    1930.0
    [m]
    DC
    PETROS
    1950.0
    [m]
    DC
    PETROS
    1970.0
    [m]
    DC
    PETROS
    1990.0
    [m]
    DC
    PETROS
    2010.0
    [m]
    DC
    PETROS
    2030.0
    [m]
    DC
    PETROS
    2050.0
    [m]
    DC
    PETROS
    2070.0
    [m]
    DC
    PETROS
    2080.0
    [m]
    DC
    PETROS
    2090.0
    [m]
    DC
    PETROS
    2100.0
    [m]
    DC
    PETROS
    2110.0
    [m]
    DC
    PETROS
    2120.0
    [m]
    DC
    PETROS
    2130.0
    [m]
    DC
    PETROS
    2140.0
    [m]
    DC
    PETROS
    2150.0
    [m]
    DC
    PETROS
    2154.0
    [m]
    DC
    PETROS
    2160.0
    [m]
    DC
    PETROS
    2180.0
    [m]
    DC
    PETROS
    2190.0
    [m]
    DC
    PETROS
    2210.0
    [m]
    DC
    PETROS
    2230.0
    [m]
    DC
    PETROS
    2240.0
    [m]
    DC
    PETROS
    2250.0
    [m]
    DC
    PETROS
    2260.0
    [m]
    DC
    PETROS
    2270.0
    [m]
    DC
    PETROS
    2280.0
    [m]
    DC
    PETROS
    2290.0
    [m]
    DC
    PETROS
    2310.0
    [m]
    DC
    PETROS
    2330.0
    [m]
    DC
    PETROS
    2350.0
    [m]
    DC
    PETROS
    2370.0
    [m]
    DC
    PETROS
    2390.0
    [m]
    DC
    PETROS
    2410.0
    [m]
    DC
    PETROS
    2435.0
    [m]
    DC
    PETROS
    2440.0
    [m]
    DC
    PETROS
    2445.0
    [m]
    DC
    PETROS
    2450.0
    [m]
    DC
    PETROS
    2455.0
    [m]
    DC
    PETROS
    2460.0
    [m]
    DC
    PETROS
    2465.0
    [m]
    DC
    PETROS
    2470.0
    [m]
    DC
    PETROS
    2475.0
    [m]
    DC
    PETROS
    2480.0
    [m]
    DC
    PETROS
    2485.0
    [m]
    DC
    PETROS
    2490.0
    [m]
    DC
    PETROS
    2495.0
    [m]
    DC
    PETROS
    2500.0
    [m]
    DC
    PETROS
    2505.0
    [m]
    DC
    PETROS
    2510.0
    [m]
    DC
    PETROS
    2515.0
    [m]
    DC
    PETROS
    2518.0
    [m]
    DC
    PETROS
    2524.0
    [m]
    DC
    PETROS
    2530.0
    [m]
    DC
    PETROS
    2536.0
    [m]
    DC
    PETROS
    2542.0
    [m]
    DC
    PETROS
    2548.0
    [m]
    DC
    PETROS
    2554.0
    [m]
    DC
    PETROS
    2560.0
    [m]
    DC
    PETROS
    2566.0
    [m]
    DC
    PETROS
    2572.0
    [m]
    DC
    PETROS
    2578.0
    [m]
    DC
    PETROS
    2584.0
    [m]
    DC
    PETROS
    2590.0
    [m]
    DC
    PETROS
    2596.0
    [m]
    DC
    PETROS
    2602.0
    [m]
    DC
    PETROS
    2608.0
    [m]
    DC
    PETROS
    2614.0
    [m]
    DC
    PETROS
    2620.0
    [m]
    DC
    PETROS
    2626.0
    [m]
    DC
    PETROS
    2632.0
    [m]
    DC
    PETROS
    2638.0
    [m]
    DC
    PETROS
    2644.0
    [m]
    DC
    PETROS
    2650.0
    [m]
    DC
    PETROS
    2656.0
    [m]
    DC
    PETROS
    2662.0
    [m]
    DC
    PETROS
    2668.0
    [m]
    DC
    PETROS
    2677.0
    [m]
    DC
    PETROS
    2683.0
    [m]
    DC
    PETROS
    2689.0
    [m]
    DC
    PETROS
    2695.0
    [m]
    DC
    PETROS
    2701.0
    [m]
    DC
    PETROS
    2707.0
    [m]
    DC
    PETROS
    2713.0
    [m]
    DC
    PETROS
    2719.0
    [m]
    DC
    PETROS
    2725.0
    [m]
    DC
    PETROS
    2731.0
    [m]
    DC
    PETROS
    2737.0
    [m]
    DC
    PETROS
    2743.0
    [m]
    DC
    PETROS
    2749.0
    [m]
    DC
    PETROS
    2755.0
    [m]
    DC
    PETROS
    2761.0
    [m]
    DC
    PETROS
    2767.0
    [m]
    DC
    PETROS
    2776.0
    [m]
    DC
    PETROS
    2782.0
    [m]
    DC
    PETROS
    2794.0
    [m]
    DC
    PETROS
    2800.0
    [m]
    DC
    PETROS
    2806.0
    [m]
    DC
    PETROS
    2812.0
    [m]
    DC
    PETROS
    2818.0
    [m]
    DC
    PETROS
    2824.0
    [m]
    DC
    PETROS
    2830.0
    [m]
    DC
    PETROS
    2836.0
    [m]
    DC
    PETROS
    2842.0
    [m]
    DC
    PETROS
    2848.0
    [m]
    DC
    PETROS
    2854.0
    [m]
    DC
    PETROS
    2860.0
    [m]
    DC
    PETROS
    2866.0
    [m]
    DC
    PETROS
    2872.0
    [m]
    DC
    PETROS
    2878.0
    [m]
    DC
    PETROS
    2884.0
    [m]
    DC
    PETROS
    2890.0
    [m]
    DC
    PETROS

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    MDT GR
    2245
    2891
    MWD - GR RES APWD
    376
    1104
    MWD - GR RES DEN NEU APWD
    2155
    2890
    MWD - GR RES DEN NEU DT APWD
    1104
    2890
    VSI4
    446
    2870

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    20
    449.6
    36
    452.0
    0.00
    PILOT HOLE
    452.0
    9 7/8
    452.0
    0.00
    INTERM.
    13 5/8
    1097.3
    17 1/2
    1104.0
    1.73
    LOT
    INTERM.
    9 5/8
    2150.3
    12 1/4
    2155.0
    1.76
    LOT
    OPEN HOLE
    2890.0
    8 1/2
    2890.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    452
    1.30
    Fresh Water Bentonite
    1104
    1.45
    INNOVERT
    1104
    1.36
    KCl / NaCl /Glycol polymer mud
    1430
    1.50
    INNOVERT
    2050
    1.51
    INNOVERT
    2155
    1.45
    INNOVERT
    2155
    1.52
    INNOVERT
    2200
    1.45
    INNOVERT
    2344
    1.47
    INNOVERT
    2402
    1.45
    INNOVERT
    2550
    1.52
    INNOVERT
    2600
    1.45
    INNOVERT
    2890
    1.46
    INNOVERT