Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
22.12.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

34/5-1 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/5-1 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/5-1
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    inline 4612-xline 2264 at top Cook
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    BG Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1292-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    66
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    07.01.2010
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    13.03.2010
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    13.03.2012
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    01.04.2012
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    EARLY JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    COOK FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    387.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3900.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3737.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    35.6
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    135
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    STATFJORD GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    61° 44' 35.19'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 35' 55.37'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6845792.02
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    478803.99
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    6307

  • Wellbore history
    General
    Well 34/5-1 S was drilled on the Blåbær prospect in Tampen North in the northern North Sea, ca 10 km to the southwest the 34/3-1 S Jordbær discovery. The objective was to prove hydrocarbons in the Cook and Statfjord formations.
    Operations and results
    Wildcat well 34/5-1 S was spudded with the semi-submersible installation Bredford Dolphin on 7 January 2010 and drilled to TD at 3900 m (3737 m TVD) in the Early Jurassic Statfjord Formation. The spud location was selected to avoid an area with risk of possible shallow gas. It was drilled vertical down to the end of the 17 1/2" section at 2135 m, deviated to maximum 35 degrees through the 12 1/4" section and back to vertical in the deepest 100 m of the final 8 1/2" section. Some hole problems were encountered in the 17 1/2" section, believed to be caused by the hole being left open too long due to WOW, otherwise operations went forth without significant problems. The well was drilled with seawater and hi-vis sweeps down to 467 m, with KCl/Glycol Enhanced Mud (GEM) from 467 m to 2135 m, and with XP-07 oil based mud from 2135 m to TD.
    Top Cook (Late Pliensbachian) reservoir came in at 3629 m, 57 m shallower than the pre-drill prediction. The Cook Formation sandstones had an average porosity of 18.3% and 20 m of net sand based on a 50% Vsh cut-off and 10% porosity. The secondary target Statfjord Formation was penetrated at 3834 m, 55 m shallower than prognosed. Statfjord was inferred to be water bearing from the LWD data. An extensive wire line programme was carried out after reaching TD. After analysing the acquired data it was concluded that the Cook reservoir was oil bearing. The lower Cook interval showed the best reservoir quality with average porosity of 20% and average Sw of 40%. The oil/water contact was interpreted to be below the lowest sand in the Cook Fm. Oil shows were recorded only in the Cook Formation reservoir, with weak shows in the upper part, and the strongest shows below 3684 m.
    Two cores were cut in the reservoir. Core 1 was in the interval 3640.5 m to 3667.5 m with 100% recovery. Core 2 was cut from 3667.5 m to 3702 m, with a 62% recovery from the top of the interval. Oil samples were collected by MDT at 3647.5 m, 3688 m, 3690.2 m and 3694.1 m.
    The well plugged back on 13 March 2010 for sidetrack 34/5-1 A to test a neighbouring Blåbær fault block. It is classified as an oil discovery.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    480.00
    3900.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3640.5
    3667.5
    [m ]
    2
    3667.5
    3688.9
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    48.4
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    MDT
    3690.20
    0.00
    OIL
    YES
    MDT
    3694.10
    0.00
    OIL
    YES
    MDT
    3688.00
    0.00
    OIL
    YES

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CMR XPT EDTC GR ATCS LEH QT
    3594
    3780
    HNGS EDTC LEH QT
    3581
    3902
    LWD - ALD CTN BAT FTWD
    3591
    3900
    LWD - BAT PWD EWR AGR ABGT
    2135
    3591
    LWD - BAT PWD EWR DGR GABI PCDC
    962
    2135
    LWD - DGR EWR PWD
    466
    964
    LWD - DWD
    412
    470
    LWD - GABI DIR RES GR PWD -
    3591
    3900
    LWD - PCDC ALD
    2135
    3591
    MDT
    3581
    3694
    MSCT
    3595
    3694
    MSCT
    3621
    3640
    MSCT
    3695
    3719
    OBMI DS
    3581
    3775
    OBMI GPIT DSI PPC EDTC GR LEH QT
    3581
    3895
    VSI
    469
    3890
    ZAIT GPIT TLD CNL ECS -
    3581
    3902
    ZAIT GPIT TLD CNL ECS HNGS
    3581
    3800

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    466.0
    36
    470.0
    0.00
    LOT
    SURF.COND.
    20
    957.0
    26
    964.0
    0.00
    LOT
    INTERM.
    13 3/8
    2125.0
    17 1/2
    2135.0
    0.00
    LOT
    INTERM.
    9 5/8
    3583.0
    12 1/4
    3591.0
    0.00
    LOT
    OPEN HOLE
    3900.0
    8 1/2
    3900.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    455
    1.04
    HiVis sweeps
    460
    1.39
    21.0
    KCL/GEM
    463
    1.04
    Hi-vis sweeps
    492
    1.39
    28.0
    KCL/GEM
    560
    1.04
    KCL GEM
    627
    1.39
    23.0
    KCL/GEM
    964
    1.39
    25.0
    KCL/GEM
    1054
    1.35
    19.0
    KCL/GEM
    1769
    1.35
    12.0
    KCL GEM
    2135
    1.40
    22.0
    XP-07
    2135
    1.41
    24.0
    XP-07
    2135
    1.35
    25.0
    KCL/GEM
    2272
    1.60
    29.0
    XP-07
    3138
    1.57
    29.0
    XP-07
    3483
    1.60
    28.0
    XP-07
    3641
    1.85
    35.0
    XP-07
    3702
    1.85
    36.0
    XP-07
    3900
    1.85
    38.0
    XP-07
    4098
    1.60
    23.0
    XP-07