Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
22.12.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

25/10-8

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/10-8
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/10-8
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    ESD 96-215 & SP. 323 /ESD 96-227 & SP. 5
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Esso Exploration and Production Norway A/S
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    867-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    50
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    17.02.1997
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    07.04.1997
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    07.04.1999
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    15.11.2001
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    INTRA DRAUPNE FM SS
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    115.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2653.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2653.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    2.7
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY PERMIAN
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ROTLIEGEND GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    59° 1' 48.48'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 13' 25.35'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6543817.16
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    455437.65
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    2955
  • Wellbore history

    General
    Well 25/10-8 was drilled with "Deep Sea Trym" to test the Hanz prospect with multiple targets. The well found gas and oil in the Upper Jurassic. A sidetrack, 25/10-8 A, was drilled to test the extension of this discovery to the east.
    Operations and results
    Exploration well 25/10-8 was spudded with the semi-submersible installation "Deepsea Trym" 17 February 1997 and drilled to a total depth of 2653 m in the Early Permian Rotliegend Group. Water based mud was used down to 1080 m and an AncoVert oil based mud from 1080 to TD. Well 25/10-8 found the Heimdal Fm to be water wet, the Upper Jurassic sands to contain gas and oil and the Middle Jurassic and Rotliegendes sands to be water wet. A core was cut from 2080 - 2107 m in the Heimdal Formation, a second core was cut from 2518 - 2546 m in Callovian Jurassic to Triassic sediments. After testing the well was plugged back to the 13 3/8" casing on 4 April 1997 as an oil and gas discovery. Sidetrack 25/10-8 A was kicked off from 1067 m and drilled to a total depth of 3460 m (2537 m TVD RKB) in Late Jurassic. An 8 1/2" hole was drilled to core point at 3110 m using oil based mud. Three cores were cut in the Late Jurassic; 3110 to 3147 m, 3147 to 3165 m , and 3165 to 3202 m. No wireline logs were run in well 25/10-8 A, only MWD. No fluid samples were taken. All reservoir sands were found water wet and sidetrack 25/10-8 A was permanently abandoned as a dry well on 27 April 1997.
    Testing
    Well 25/10-8 was perforated from 2391.4 - 2398.4 m in the Upper Jurassic. The drill stem test flowed 692 Sm3/D oil of density 0.84 g/cm3
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1090.00
    2652.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2080.0
    2107.9
    [m ]
    2
    2518.0
    2546.5
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    56.4
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Core photos

    Core photos
    Core photo at depth: 2080-2085m
    Core photo at depth: 2085-2090m
    Core photo at depth: 2090-2095m
    Core photo at depth: 2095-2100m
    Core photo at depth: 2100-2105m
    2080-2085m
    2085-2090m
    2090-2095m
    2095-2100m
    2100-2105m
    Core photo at depth: 2105-2107m
    Core photo at depth: 2518-2523m
    Core photo at depth: 2523-2528m
    Core photo at depth: 2528-2533m
    Core photo at depth: 2533-2538m
    2105-2107m
    2518-2523m
    2523-2528m
    2528-2533m
    2533-2538m
    Core photo at depth: 2538-2543m
    Core photo at depth: 2543-2546m
    Core photo at depth:  
    Core photo at depth:  
    Core photo at depth:  
    2538-2543m
    2543-2546m
  • Palynological slides at the Norwegian Offshore Directorate

    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    1400.0
    [m]
    DC
    RRI
    1420.0
    [m]
    DC
    RRI
    1430.0
    [m]
    DC
    RRI
    1440.0
    [m]
    DC
    RRI
    1450.0
    [m]
    DC
    RRI
    1460.0
    [m]
    DC
    RRI
    1470.0
    [m]
    DC
    RRI
    1480.0
    [m]
    DC
    RRI
    1490.0
    [m]
    DC
    RRI
    1500.0
    [m]
    DC
    RRI
    1510.0
    [m]
    DC
    RRI
    1520.0
    [m]
    DC
    RRI
    1530.0
    [m]
    DC
    RRI
    1540.0
    [m]
    DC
    RRI
    1550.0
    [m]
    DC
    RRI
    1560.0
    [m]
    DC
    RRI
    1580.0
    [m]
    DC
    RRI
    1600.0
    [m]
    DC
    RRI
    1610.0
    [m]
    DC
    RRI
    1620.0
    [m]
    DC
    RRI
    1630.0
    [m]
    DC
    RRI
    1640.0
    [m]
    DC
    RRI
    1650.0
    [m]
    DC
    RRI
    1660.0
    [m]
    DC
    RRI
    1670.0
    [m]
    DC
    RRI
    1680.0
    [m]
    DC
    RRI
    1690.0
    [m]
    DC
    RRI
    1700.0
    [m]
    DC
    RRI
    1710.0
    [m]
    DC
    RRI
    1720.0
    [m]
    DC
    RRI
    1730.0
    [m]
    DC
    RRI
    1750.0
    [m]
    DC
    RRI
    1760.0
    [m]
    DC
    RRI
    1770.0
    [m]
    DC
    RRI
    1780.0
    [m]
    DC
    RRI
    1790.0
    [m]
    DC
    RRI
    1800.0
    [m]
    DC
    RRI
    1810.0
    [m]
    DC
    RRI
    1820.0
    [m]
    DC
    RRI
    1830.0
    [m]
    DC
    RRI
    1840.0
    [m]
    DC
    RRI
    1850.0
    [m]
    DC
    RRI
    1860.0
    [m]
    DC
    RRI
    1870.0
    [m]
    DC
    RRI
    1880.0
    [m]
    DC
    RRI
    1890.0
    [m]
    DC
    RRI
    1900.0
    [m]
    DC
    RRI
    1920.0
    [m]
    DC
    RRI
    1930.0
    [m]
    DC
    RRI
    1940.0
    [m]
    DC
    RRI
    1950.0
    [m]
    DC
    RRI
    1960.0
    [m]
    DC
    RRI
    1970.0
    [m]
    DC
    RRI
    1980.0
    [m]
    DC
    RRI
    1990.0
    [m]
    DC
    RRI
    2000.0
    [m]
    DC
    RRI
    2010.0
    [m]
    DC
    RRI
    2020.0
    [m]
    DC
    RRI
    2030.0
    [m]
    DC
    RRI
    2040.0
    [m]
    DC
    RRI
    2050.0
    [m]
    DC
    RRI
    2060.0
    [m]
    DC
    RRI
    2070.0
    [m]
    DC
    RRI
    2080.0
    [m]
    DC
    RRI
    2122.0
    [m]
    DC
    RRI
    2131.0
    [m]
    DC
    RRI
    2137.0
    [m]
    DC
    RRI
    2161.0
    [m]
    DC
    RRI
    2170.0
    [m]
    DC
    RRI
    2179.0
    [m]
    DC
    RRI
    2182.0
    [m]
    DC
    RRI
    2191.0
    [m]
    DC
    RRI
    2200.0
    [m]
    DC
    RRI
    2210.0
    [m]
    DC
    RRI
    2270.0
    [m]
    DC
    RRI
    2360.0
    [m]
    DC
    RRI
  • Oil samples at the Norwegian Offshore Directorate

    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    DST1
    2392.00
    2398.00
    30.03.1997 - 09:20
    YES
  • Lithostratigraphy

  • Composite logs

    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.45
  • Geochemical information

    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    1.96
    pdf
    1.36
  • Documents – reported by the production licence (period for duty of secrecy expired)

    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    80.09
  • Drill stem tests (DST)

    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    2392
    2398
    15.9
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    24.000
    25.000
    94
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    692
    0.840
    0.700
    116
  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CBIL GR CHT
    2345
    2650
    DPR - GR RES DIR
    67
    214
    DPR - GR RES DIR
    1070
    2066
    DPR - GR RES DIR
    2235
    2505
    DPR - GR RES DIR
    2505
    2596
    DPR - GR RES MDL MNP
    2023
    2235
    DPR GRC MDL MNP
    2356
    2639
    GR CCL
    2241
    2364
    HDLL MAC DGR
    1050
    2649
    MRIL ZDL CND DSL
    1065
    2637
    RCI GR
    2078
    2629
    RCI GR
    2117
    2528
    RCI GR
    2372
    2397
    SWC GR
    1502
    2598
    VSP
    460
    2650
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    201.0
    36
    201.0
    0.00
    LOT
    SURF.COND.
    13 3/8
    1067.0
    17 1/2
    1080.0
    1.56
    LOT
    INTERM.
    9 5/8
    2249.0
    12 1/4
    2249.0
    0.00
    LOT
    LINER
    7
    2653.0
    8 1/2
    2653.0
    0.00
    LOT
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    200
    1.75
    spud mud
    200
    1.75
    low solids
    1034
    1.75
    low solids
    1080
    1.40
    36.0
    oil based
    1081
    1.40
    36.0
    oil based
    1081
    1.74
    low solids
    1083
    1.33
    30.0
    oil based
    1184
    1.32
    32.0
    oil based
    1492
    1.32
    37.0
    oil based
    1581
    1.32
    34.0
    oil based
    1770
    1.32
    35.0
    oil based
    1884
    1.32
    33.0
    oil based
    2080
    1.32
    34.0
    oil based
    2092
    1.32
    32.0
    oil based
    2107
    1.32
    30.0
    oil based
    2249
    1.32
    32.0
    oil based
    2360
    1.32
    32.0
    oil based
    2518
    1.32
    33.0
    oil based
    2545
    1.32
    33.0
    oil based
    2610
    1.32
    30.0
    oil based
    2653
    1.32
    28.0
    oil based
  • Pressure plots

    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.22