Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
22.12.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

1/5-5

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    1/5-5
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    1/5-5
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    Crossline 19180 in Q30_CNS_marge_3
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Total E&P Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1608-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    206
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    24.02.2016
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    16.09.2016
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    16.09.2016
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    16.09.2018
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    16.09.2018
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    48.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    70.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    5942.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    5940.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    4
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    197
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BRYNE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    56° 43' 48.02'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 38' 44.92'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6287528.37
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    478327.19
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7874

  • Wellbore history
    General
    Well 1/5-5 was drilled to test the Solaris prospect in the Central Graben, about 40 km North-West of the Ekofisk field, close to the border between UK and Norway. The primary target was to prove reservoir and hydrocarbon presence in Late Jurassic reservoir sands of the Ula Formation. Secondary target was the Triassic Skagerrak Formation.
    Operations and results
    Wildcat well 1/5-5 was spudded with the jack-up installation Mærsk Gallant on 24 February 2016 and drilled to TD at 5942 m in the Middle - Late Vestland Group. A pilot hole was drilled from 210 to 1140 m to check for shallow gas, but no gas was seen and the opening up and continuation of the well could be carried out. The well is a deep high temperature-high pressure well. Thirty-nine days were counted as NPT. The single main cause of NPT (11 days) was main rig maintenance and changing the drilling line after installing BOP at 1140 m. Otherwise operations proceeded without significant problems. The well was drilled with seawater and hi-vis pills down to 1140 m, with NABM oil based mud from 1140 m to TD.
    The primary target Ula Formation sandstone was encountered at 5831 m. The Ula Formation was 80 m thick and consisted mainly of sandstones and a few siltstones. The reservoir showed traces of gas and wireline logging was carried out for further classification. The logging proved the reservoir tight, of moderate to poor quality, and dry. There were no shows above the oil-based mud. As the primary reservoir was found dry, it was decided not to continue to the secondary, Triassic target.
    No cores were cut. No fluid sample was taken.
    The well was permanently abandoned on 16 September 2016 as a dry well.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1143.00
    5942.00

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    GYRO
    120
    5535
    HAPS HLDS HNGS GR
    5551
    5925
    IBC CBL VDL GR
    1130
    4171
    IBC CBL VDL GR
    4180
    5544
    LWD - BITGR GR RES PWD DI
    3105
    3477
    LWD - DI
    118
    210
    LWD - DI APWD
    210
    1143
    LWD - DI GR RES APWD SON
    210
    1140
    LWD - GR RES PWD DI
    1143
    3105
    LWD - GR RES PWD DI
    3477
    4217
    LWD - NBGR RES GR PWD DI
    4218
    5561
    LWD - PWD
    5565
    5566
    LWD - RES GR PWD DI
    5566
    5942
    PPC DSI GR
    2400
    5556
    QAIT PPC DSI
    5551
    5937
    XPT GR
    5810
    5872

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    200.0
    36
    210.0
    0.00
    SURF.COND.
    20
    1129.0
    26
    1140.0
    1.74
    LOT
    PILOT HOLE
    1140.0
    9 7/8
    1140.0
    0.00
    INTERM.
    13 5/8
    4201.0
    16
    4217.0
    2.06
    FIT
    INTERM.
    9 7/8
    5551.0
    12 1/4
    5565.0
    2.25
    LOT
    OPEN HOLE
    5942.0
    8 1/2
    5942.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    200
    1.05
    15.0
    Sea water
    200
    1.25
    23.0
    Spud Mud
    242
    1.25
    14.0
    Spud mud
    301
    1.05
    17.0
    Spud Mud
    301
    1.32
    17.0
    Spud mud
    700
    1.70
    30.0
    EMS-4750
    725
    1.25
    17.0
    Spud mud
    780
    1.03
    1.0
    Sea water
    827
    1.05
    15.0
    Spud mud
    1130
    1.23
    11.0
    Silicate
    1140
    1.22
    13.0
    Silicate
    1140
    1.05
    15.0
    Spud Mud
    1143
    1.64
    44.0
    EMS-4600
    1544
    1.67
    53.0
    EMS-4600
    1785
    1.88
    58.0
    EMS-4750
    1843
    1.67
    50.0
    EMS-4600
    2312
    1.68
    45.0
    EMS-4600
    3216
    1.88
    55.0
    EMS-4750
    3307
    1.68
    41.0
    EMS-4600
    3458
    1.70
    41.0
    EMS-4600
    4045
    1.88
    55.0
    EMS-4750
    4100
    1.70
    42.0
    EMS-4600
    4180
    1.88
    59.0
    EMS-4750
    4211
    1.70
    41.0
    EMS-4600
    4290
    1.88
    81.0
    EMS-4400
    4330
    1.70
    41.0
    EMS-4750
    4517
    1.72
    43.0
    EMS-4750
    4634
    1.74
    44.0
    EMS-4750
    4787
    1.78
    46.0
    EMS-4750
    4933
    1.82
    44.0
    EMS-4750
    4942
    2.18
    88.0
    EMS-4400
    4994
    1.85
    48.0
    EMS-4750
    5100
    1.88
    54.0
    EMS-4750
    5158
    1.85
    46.0
    EMS-4750
    5274
    1.89
    70.0
    EMS-4750
    5331
    1.85
    47.0
    EMS-4750
    5392
    2.18
    91.0
    EMS-4400
    5419
    1.88
    48.0
    EMS-4750
    5560
    2.18
    90.0
    EMS-4400
    5561
    1.88
    53.0
    EMS-4750
    5582
    2.10
    47.0
    EMS-4400
    5869
    2.12
    60.0
    EMS-4400
    5942
    2.18
    93.0
    EMS-4400
    5942
    2.14
    72.0
    EMS-4400