Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
22.12.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

16/3-5

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/3-5
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    16/3-5
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    LN0902 : inline 5019 & crossline 3639
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Lundin Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1419-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    63
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    04.01.2013
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    07.03.2013
    Plugged and abondon date
    Date when the P&A-operations of the wellbore was finished, as reported by the operator to the Norwegian Offshore Directorate throught DDRS (Daily Drilling Reporting System). Only applied once pr. wellhead/surface location.
    07.03.2013
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    07.03.2015
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    20.05.2015
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    INTRA DRAUPNE FM SS
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    PERMIAN
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    ZECHSTEIN GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    115.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2050.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2050.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    0.7
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    86
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    PERMIAN
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ROTLIEGEND GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 46' 31.59'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 42' 18.59'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6515235.00
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    482950.01
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    7046

  • Wellbore history
    General
    Well 16/3-5 is an appraisal well on the southeaster part of the Sverdrup Field on the Utsira High in the North Sea. The objectives were to determine presence and thickness of the Late Jurassic Intra-Draupne Formation sandstone in a representative part of the Avaldsnes High (informal basement structure), and to investigate the reservoir properties of the Permian Rotliegend Group and Zechstein Group.
    Operations and results
    Appraisal well 16/3-5 was spudded with the semi-submersible installation Bredford Dolphin on 4 January 2013 and drilled to TD at 2050 m in the Permian Rotliegend Group. No significant problem was encountered in the operations. The well was drilled with seawater down to 700 m and with Performadril water based mud from 700 m to TD.
    The well encountered top Draupne Formation shales at 1909 m and the Intra-Draupne Formation sandstone at 1918 m. The Draupne shales are immature but has very good source rock potential with TOC around 7-8 % and Hydrogen Index around 540 mg HC/g TOC. The Intra-Draupne sandstone is 14 m thick and rested on Permian Zechstein Group carbonates. An oil column of approximately 30 meters was found in the Intra Draupne Sandstone and Permian carbonate. The well proves an excellent development of the Late Jurassic sandstone in the southern part of the Avaldsnes High and the reservoir level was encountered a bit shallower than predicted. The Permian carbonates, mainly limestone, had varying reservoir quality with the best quality principally located in open and partially cemented vugs, plus in the fractures. The well results show an oil down-to situation and consequently no oil/water contact was encountered. The oil bearing Zechstein limestones are in pressure communication with the overlying Draupne sandstone.
    Two cores were cut from 1912 to 1950.5 m with ca 97% recovery in both. The cored interval includes the lower part of the Draupne Formation shales, the whole Intra-Draupne sandstone unit, one m of Triassic sediments, and 18.5 m of Permian limestones.  MDT oil samples were taken at 1920.1 m, 1929.5 m, and 1943.6 m. MDT water samples were taken at 1959.4 m.
    The well was permanently abandoned on 7 March 2013 as an oil appraisal well.
    Testing
    One commingled production test from both Draupne sandstones and Zechstein carbonates was performed in the well. DST 1A tested only the lower zone in the Zechstein Group carbonates from 1937 to 1945 m. This zone did not produce oil to surface, but a rate of 2-3 Sm3/day was estimated based on volumes of base oil to tank.
    DST1 B tested both zones: 1937 to 1945 m in Zechstein plus 1918 to 1931.3 m in the Intra-Draupne Formation Sandstone. The Intra-Draupne sandstone showed extremely good reservoir properties as well as no indications of pressure barriers. This zone produced 740 Sm3 oil and 17000 Sm3 gas /day through a 40/64" choke. The GOR was 17.5 Sm3/Sm3, the oil density was 0.89 g/cm3 and the gas gravity was 0.79 (air = 1). The H2S and CO2 contents in the gas were ca 0.5 ppm and ca 0.4%, respectively. The maximum DST temperature at the end of the Main flow was 79.9 °C.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    710.00
    2049.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1912.0
    1933.3
    [m ]
    2
    1934.0
    1950.1
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    37.4
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    MDT
    1943.60
    0.00
    OIL
    03.02.2013 - 00:00
    NO
    MDT
    0.00
    1920.10
    OIL
    03.02.2013 - 00:00
    NO

  • Lithostratigraphy

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    1918
    1945
    16.0
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    740
    16000
    17

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    FMI PPC MSIP PPC EDTC
    1425
    1955
    GR CCL
    1794
    1833
    MDT
    1958
    2024
    MSCT GR
    1059
    2044
    MSCT GR
    1961
    1965
    MWD - DIR PWD GR RES
    140
    706
    MWD - DIR PWD GR RES
    1950
    2049
    MWD - DIR PWD GR RES DEN NEU SON
    695
    1957
    PEX HRLA ECS HNGS
    1926
    2045
    USIT CBL
    1357
    1950
    VSP
    532
    2030

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    218.0
    36
    220.0
    0.00
    SURF.COND.
    20
    692.0
    26
    698.0
    1.68
    LOT
    PILOT HOLE
    706.0
    9 7/8
    706.0
    0.00
    INTERM.
    9 5/8
    1873.0
    12 1/4
    1882.0
    1.67
    LOT
    LINER
    7
    1957.0
    8 1/2
    1958.0
    0.00
    OPEN HOLE
    2050.0
    6
    2050.0
    0.00