Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
21.11.2024 - 01:28
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6506/11-9 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6506/11-9 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6506/11-9
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    inline2273 & crossline 2342 -Site survey ST0808
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Centrica Resources (Norge) AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1402-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    118
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    09.05.2012
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    03.09.2012
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    03.09.2014
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    13.01.2015
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    SHOWS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    18.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    249.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    5330.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4972.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    31.6
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    167
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    ÅRE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    65° 10' 18.54'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    6° 37' 21.26'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7229882.11
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    388624.07
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    6852

  • Wellbore history
    General
    Well 6506/11-9 S tested the Cooper Prospect on the Halten Terrace in the Norwegian Sea between the Morvin and Smørbukk Fields. The primary objective of the well was to test the hydrocarbon potential of the Middle and Early
    Jurassic Fangst and Båt Groups, specifically the Garn and Ile Formations. The Early Cretaceous Lysing and Intra Lange Formations were regarded as secondary targets.
    Operations and results
    Wildcat well 6506/11-9 S was spudded with the semi-submersible installation West Alpha on 9 May 2012 and drilled to TD at 5330 m (4972 m TVD) in the Early Jurassic Åre Formation. The well path assumes an 'S' shape and the surface location was purposely offset from the target to avoid locating the rig in an area of cold-water corals. The well was drilled with KCl water based mud down to 1170 m, with Versatec oil based mud from 1170 m to 2130 m, and with Versatherm oil based mud from 2130 m to TD.
    Hydrocarbon recognition was partly masked by oil based mud but significant heavy hydrocarbon gases and moderate to strong shows were observed in the relatively thin, interbedded sandstones of the Lysing Formation between 3516 and 3594 m. Hydrocarbon shows were observed also in Intra-Lange sands. The reservoirs in both Lysing and Lange was fragmented, with a low reservoir nett to gross ratio. The Garn Formation was encountered at 4716 m. Good hydrocarbon shows were encountered in the Garn Formation and on the cores in the Upper Ile Formation down to 4828 m, but pervasive secondary silica cementation resulted in extensive permeability destruction in the Garn Formation. The Tofte and Tilje Formations were interpreted as being water wet.
    Two conventional cores were cut sequentially in the Garn and underlying Not Formations. A further three cores were taken in the Ile Formation, based on indeterminate shows. One core was cut in the Tilje Formation, based on hydrocarbon shows that were subsequently interpreted as being due to recirculated hydrocarbons from the overlying oil bearing horizon. MDT fluid samples were taken at 4765 m (contaminated oil), 4767 m (oil, water and filtrate), 4831 m (water), and 5246.7 m (water).
    The well was permanently abandoned on 3 September 2012 on as a dry well with shows.
    Testing
    The 7" liner was perforated over the entire Garn Formation from 4718 m to 4780 m and an attempt was made to perform a DST. The well failed to flow during the DST and the decision was made to abandon further testing, due to tight reservoir.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1220.00
    5330.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    4731.0
    4754.6
    [m ]
    2
    4755.5
    4800.6
    [m ]
    3
    4815.0
    4841.3
    [m ]
    4
    4852.5
    4878.9
    [m ]
    5
    4880.5
    4903.7
    [m ]
    6
    5110.0
    5138.3
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    172.9
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    AIT PPC DSI GPIT PPC GR
    4612
    5032
    CMR HXPT GR
    4625
    5320
    LDS APS HNGS
    4612
    5032
    LWD - GR PWD DEN RES NEU DI
    4801
    5330
    LWD - GVR GR RES NEU DEN SON
    4700
    4815
    LWD - GVR STET RES GR NEU DEN SO
    4615
    4731
    LWD - PDGR DI PWD RES GR SON
    1211
    2536
    LWD - PDGR FPWD PWD RES GR NEU D
    2536
    4615
    LWD - PWD RES GR DI
    357
    1211
    LWD - PWD RES GR DI SON
    357
    1200
    LWD-DI
    267
    357
    PMIT GR CCL
    280
    4605
    PS HY PO PQ HY PO IFA MS1-2 GR
    4744
    4922
    PS XLD HY PO LFA MS GR
    5021
    5246
    SC PO PALE PS HY PO IFA AMS GR
    4763
    4830
    USIT VBL
    4520
    4787
    VSI2 GR
    604
    5020

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    350.0
    36
    352.0
    0.00
    PILOT HOLE
    1200.0
    9 7/8
    1200.0
    0.00
    SURF.COND.
    29
    1206.0
    26
    1211.0
    1.72
    FIT
    INTERM.
    13 3/8
    2530.0
    17 1/2
    2536.0
    1.90
    FIT
    SURF.COND.
    9 5/9
    4609.0
    12 1/4
    4615.0
    2.08
    FIT
    LINER
    7
    4864.0
    8 1/2
    5330.0
    0.00

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    375
    1.15
    16.0
    KCl mud
    544
    1.21
    15.0
    KCl mud
    1150
    1.21
    16.0
    KCl mud
    1200
    1.19
    17.0
    KCl mud
    1211
    1.02
    SEAWATER
    2530
    1.74
    56.0
    Versatherm OBM
    2536
    1.59
    58.0
    Versatec OBM
    3596
    1.76
    64.0
    Versatherm OBM
    4616
    1.83
    60.0
    Versatherm OBM
    4616
    1.93
    1.0
    OBM
    4616
    1.76
    58.0
    Versatherm OBM
    4661
    1.93
    74.0
    Versatherm OBM
    4783
    1.91
    68.0
    Versatherm OBM
    4852
    1.91
    66.0
    Versatherm OBM
    4903
    1.91
    58.0
    Versatherm OBM
    5137
    1.91
    59.0
    Versatherm OBM
    5225
    1.91
    58.0
    Versatherm OBM
    5330
    1.02
    1.0
    Inhibited seawater
    5330
    1.91
    71.0
    Versatherm OBM