Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
07.11.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

34/10-11

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/10-11
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/10-11
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    S 3D 152 SP 365
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Den norske stats oljeselskap a.s
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    264-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    132
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    23.10.1980
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    05.03.1981
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    05.03.1983
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    03.12.2014
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    EARLY JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    STATFJORD GP
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    EARLY JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    AMUNDSEN FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    229.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2155.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2155.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    1.1
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    85
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    LUNDE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    61° 13' 20.84'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 17' 32.9'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6787932.93
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    461999.28
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    211
  • Wellbore history

    General
    Well 34/10-11 was drilled on the Gullfaks Delta structure in the North Sea. The primary objective of the well was to test sandstones of Middle Jurassic age. Secondary objectives were sandstones of Lower Jurassic age.
    Operations and results
    Appraisal well 34/10-11 was spudded with the semi-submersible installation Ross Rig on 23 October 1980 and drilled to TD at 2155 m in Late Triassic sediments of the Lunde Formation. Bad weather caused 511 hrs lost time (15.7% of total rig time). Significant lost time (509 hrs) was caused also by malfunction and repairs of the BOP. The well was drilled with spud mud down to 463 m, with gel/lignosulphonate/seawater mud from 463 m to 1100 m, with Gypsum/lignosulphonate/sweater mud from 1100 m to 1720 m, and with gel/lignosulphonate/seawater mud from 1720 m to TD.
    First oil shows were recorded from 1090 m to 1200 m, intermittent weak shows were seen from 1420 to 1495, and more or less continuous oil shows were recorded on limestone from 1660 m to top reservoir at 1868 m. The well proved oil in sandstones from top of the Early Jurassic Amundsen Formation at 1868 down to the OWC at 2038 m in Late Triassic sediments of the Raude Formation. Below 2038 m shows were recorded down to TD.
    Six cores were cut in the interval 1870 m to 1926.5 m in the Amundsen and Nansen formations. Two FIT fluid samplings were attempted. FIT 1 at 2081 m recovered 3 litres 35 °API oil and 7 litres of mud filtrate in the 2 3/4 gallon chamber. The FIT 2 at 2051 m did not recover any fluids.
    The well was permanently abandoned on 5 march 1981 as a as an oil appraisal well on the Gullfaks field.
    Testing
    Two drill stem tests were conducted in the Statfjord Group.
    DST1 tested the interval 2018 to 2028 m in the Raude Formation. It produced 399 Sm3 oil and 60880 Sm3 gas /day through a 24/64” choke. GOR was 153 Sm3/Sm3, oil gravity was 36.5°API, and gas gravity was 0.647 (air = 1). The bottom hole temperature in the test was 79.9°C.
    DST2 tested the interval 1891 to 1896 m in the Nansen Formation. It produced 389 Sm3 oil and 64560 Sm3 gas /day through a 24/64” choke. GOR was 166 Sm3/Sm3, oil gravity was 36.5°API, and gas gravity was 0.656 (air = 1). The bottom hole temperature in the test was 75.6°C.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    300.00
    2155.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    1870.0
    1879.7
    [m ]
    2
    1887.0
    1890.7
    [m ]
    3
    1891.5
    1893.8
    [m ]
    4
    1899.0
    1906.5
    [m ]
    5
    1909.0
    1920.0
    [m ]
    6
    1920.0
    1925.6
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    39.8
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Core photos

    Core photos
    Core photo at depth: 1870-1872m
    Core photo at depth: 1872-1875m
    Core photo at depth: 1875-1878m
    Core photo at depth: 1878-1879m
    Core photo at depth: 1887-1889m
    1870-1872m
    1872-1875m
    1875-1878m
    1878-1879m
    1887-1889m
    Core photo at depth: 1889-1890m
    Core photo at depth: 1891-1893m
    Core photo at depth: 1899-1901m
    Core photo at depth: 1901-1904m
    Core photo at depth: 1904-1906m
    1889-1890m
    1891-1893m
    1899-1901m
    1901-1904m
    1904-1906m
    Core photo at depth: 1909-1911m
    Core photo at depth: 1911-1914m
    Core photo at depth: 1914-1917m
    Core photo at depth: 1917-1919m
    Core photo at depth: 1919-1920m
    1909-1911m
    1911-1914m
    1914-1917m
    1917-1919m
    1919-1920m
    Core photo at depth: 1920-1927m
    Core photo at depth: 1922-1925m
    Core photo at depth: 1925-1926m
    Core photo at depth:  
    Core photo at depth:  
    1920-1927m
    1922-1925m
    1925-1926m
  • Oil samples at the Norwegian Offshore Directorate

    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    DST
    TEST2
    1891.00
    1896.00
    23.02.1981 - 00:00
    YES
  • Lithostratigraphy

  • Documents – reported by the production licence (period for duty of secrecy expired)

  • Drill stem tests (DST)

    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    2018
    2028
    9.5
    2.0
    1891
    1896
    9.5
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    2.0
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    404
    61171000
    0.840
    0.647
    847
    2.0
    397
    67402000
    0.830
    0.656
  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    BGT GR
    459
    1445
    CBL
    255
    2116
    CBL VDL
    1843
    2155
    DLL MSFL GR
    1830
    2157
    FDC CNL GR CAL
    315
    2158
    GEODIP
    1860
    2100
    HDT DIP
    1713
    2158
    ISF SON GR SP
    315
    2156
    LSS GR
    1814
    2156
    NGS
    1713
    2158
    WAVEFORM
    1814
    2156
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    315.0
    36
    316.0
    0.00
    LOT
    SURF.COND.
    20
    459.0
    26
    463.0
    1.50
    LOT
    LINER
    16
    1100.0
    22
    1100.0
    1.60
    LOT
    INTERM.
    13 3/8
    1438.0
    17 1/2
    1445.0
    1.77
    LOT
    INTERM.
    9 5/8
    1715.0
    12 1/4
    1720.0
    1.93
    LOT
    LINER
    7
    2155.0
    8 1/2
    2155.0
    0.00
    LOT
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    525
    1.11
    48.0
    waterbased
    1300
    1.25
    51.0
    waterbased
    1410
    1.37
    49.0
    waterbased
    1525
    1.55
    55.0
    waterbased
    1760
    1.82
    51.0
    waterbased
    1950
    1.86
    55.0
    waterbased
  • Pressure plots

    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.19