Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
03.11.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

25/10-8 A

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/10-8 A
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    APPRAISAL
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/10-8
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    ESD 96-215& SP. 323 /ESD 96-227 & SP. 51
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Esso Exploration and Production Norway A/S
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    889-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    20
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    08.04.1997
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    27.04.1997
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    27.04.1999
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    15.11.2001
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    115.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3460.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2562.2
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    59
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    INTRA DRAUPNE FM SS
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    59° 1' 48.48'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 13' 25.35'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6543817.16
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    455437.65
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    3098
  • Wellbore history

    General
    Well 25/10-8 was drilled with "Deep Sea Trym" to test the Hanz prospect with multiple targets. The well found gas and oil in the Upper Jurassic. A sidetrack, 25/10-8 A, was drilled to test the extension of this discovery to the east.
    Operations and results
    Exploration well 25/10-8 was spudded with the semi-submersible installation "Deepsea Trym" 17 February 1997 and drilled to a total depth of 2653 m in the Early Permian Rotliegend Group. Water based mud was used down to 1080 m and an AncoVert oil based mud from 1080 to TD. Well 25/10-8 found the Heimdal Fm to be water wet, the Upper Jurassic sands to contain gas and oil and the Middle Jurassic and Rotliegendes sands to be water wet. A core was cut from 2080 - 2107 m in the Heimdal Formation, a second core was cut from 2518 - 2546 m in Callovian Jurassic to Triassic sediments. After testing the well was plugged back to the 13 3/8" casing on 4 April 1997 as an oil and gas discovery. Sidetrack 25/10-8 A was kicked off from 1067 m and drilled to a total depth of 3460 m (2537 m TVD RKB) in Late Jurassic. An 8 1/2" hole was drilled to core point at 3110 m using oil based mud. Three cores were cut in the Late Jurassic; 3110 to 3147 m, 3147 to 3165 m , and 3165 to 3202 m. No wireline logs were run in well 25/10-8 A, only MWD. No fluid samples were taken. All reservoir sands were found water wet and sidetrack 25/10-8 A was permanently abandoned as a dry well on 27 April 1997.
    Testing
    Well 25/10-8 was perforated from 2391.4 - 2398.4 m in the Upper Jurassic. The drill stem test flowed 692 Sm3/D oil of density 0.84 g/cm3. No drillstem test was performed in 25/10-8 A.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1080.00
    3460.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3110.0
    3147.6
    [m ]
    2
    3147.0
    3164.6
    [m ]
    3
    3165.0
    3202.0
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    92.2
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Core photos

    Core photos
    Core photo at depth: 3110-3115m
    Core photo at depth: 3115-3120m
    Core photo at depth: 3120-3125m
    Core photo at depth: 3125-3130m
    Core photo at depth: 3130-2335m
    3110-3115m
    3115-3120m
    3120-3125m
    3125-3130m
    3130-2335m
    Core photo at depth: 3135-3140m
    Core photo at depth: 3140-3145m
    Core photo at depth: 3145-3147m
    Core photo at depth: 3147-3152m
    Core photo at depth: 3152-3157m
    3135-3140m
    3140-3145m
    3145-3147m
    3147-3152m
    3152-3157m
    Core photo at depth: 3157-3162m
    Core photo at depth: 3162-3164m
    Core photo at depth: 3165-3170m
    Core photo at depth: 3170-3175m
    Core photo at depth: 3175-3180m
    3157-3162m
    3162-3164m
    3165-3170m
    3170-3175m
    3175-3180m
    Core photo at depth: 3180-3185m
    Core photo at depth: 3185-3190m
    Core photo at depth: 3190-3195m
    Core photo at depth: 3195-3200m
    Core photo at depth: 3200-3202m
    3180-3185m
    3185-3190m
    3190-3195m
    3195-3200m
    3200-3202m
  • Palynological slides at the Norwegian Offshore Directorate

    Palynological slides at the Norwegian Offshore Directorate
    Sample depth
    Depth unit
    Sample type
    Laboratory
    2400.0
    [m]
    DC
    RRI
    2420.0
    [m]
    DC
    RRI
    2440.0
    [m]
    DC
    RRI
    2460.0
    [m]
    DC
    RRI
    2480.0
    [m]
    DC
    RRI
    2500.0
    [m]
    DC
    RRI
    2520.0
    [m]
    DC
    RRI
    2540.0
    [m]
    DC
    RRI
    2560.0
    [m]
    DC
    RRI
    2580.0
    [m]
    DC
    RRI
    2600.0
    [m]
    DC
    RRI
    2620.0
    [m]
    DC
    RRI
    3110.0
    [m]
    C
    APT
    3118.8
    [m]
    C
    APT
    3130.6
    [m]
    C
    APT
    3140.3
    [m]
    C
    APT
    3155.5
    [m]
    C
    APT
    3160.7
    [m]
    C
    APT
    3168.7
    [m]
    C
    APT
    3179.4
    [m]
    C
    APT
    3192.7
    [m]
    C
    APT
    3202.0
    [m]
    C
    APT
    3210.0
    [m]
    DC
    APT
    3216.0
    [m]
    DC
    APT
    3222.0
    [m]
    DC
    APT
    3228.0
    [m]
    DC
    APT
    3234.0
    [m]
    DC
    APT
    3240.0
    [m]
    DC
    APT
    3246.0
    [m]
    DC
    APT
    3250.0
    [m]
    DC
    APT
    3260.0
    [m]
    DC
    APT
    3270.0
    [m]
    DC
    APT
    3280.0
    [m]
    DC
    APT
    3290.0
    [m]
    DC
    APT
    3300.0
    [m]
    DC
    APT
    3310.0
    [m]
    DC
    APT
    3320.0
    [m]
    DC
    APT
    3330.0
    [m]
    DC
    APT
    3340.0
    [m]
    DC
    APT
    3350.0
    [m]
    DC
    APT
    3360.0
    [m]
    DC
    APT
    3370.0
    [m]
    DC
    APT
    3370.0
    [m]
    DC
    APT
    3380.0
    [m]
    DC
    APT
    3390.0
    [m]
    DC
    APT
    3400.0
    [m]
    DC
    APT
    3410.0
    [m]
    DC
    APT
    3430.0
    [m]
    DC
    APT
    3440.0
    [m]
    DC
    APT
  • Lithostratigraphy

  • Composite logs

    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.30
  • Geochemical information

    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    1.96
    pdf
    1.36
  • Documents – reported by the production licence (period for duty of secrecy expired)

    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    58.55
  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    GR RES DEN NEU DIR
    3460
    3460
    GR RES DENS NEU
    3070
    3406
    GR RES DIR
    1077
    3110
    GR RES DIR
    3147
    3165
    GR RES DIR
    3165
    3202
    GR RES DIR
    3202
    3460
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    201.0
    36
    201.0
    0.00
    LOT
    SURF.COND.
    13 3/8
    1070.0
    17 1/2
    1080.0
    1.56
    LOT
    OPEN HOLE
    3460.0
    8 1/2
    3460.0
    0.00
    LOT
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    200
    1.75
    low solids
    200
    1.75
    spud mud
    1034
    1.75
    low solids
    1081
    1.74
    35.0
    50.0
    oil based
    1244
    1.30
    34.0
    oil based
    1939
    1.30
    36.0
    oil based
    2347
    1.30
    38.0
    60.5
    oil based
    2465
    1.40
    48.0
    52.0
    oil based
    2943
    1.30
    37.0
    54.0
    oil based
    2959
    1.40
    43.0
    54.0
    oil based
    3103
    1.38
    37.0
    58.0
    oil based
    3110
    1.38
    38.0
    56.0
    oil based
    3148
    1.38
    39.0
    54.0
    oil based
    3165
    1.38
    36.0
    54.0
    oil based
    3202
    1.38
    35.0
    50.0
    oil based
    3348
    1.38
    35.0
    48.0
    oil based
    3385
    1.40
    35.0
    oil based
    3460
    1.38
    38.0
    52.0
    oil based
    3460
    1.44
    36.0
    50.0
    oil based