Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
27.04.2024 - 01:34
Time of last synchronization with Norwegian Offshore Directorate's internal systems

34/3-3 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/3-3 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/3-3
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    innline 5024 & crossline 2782
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    BG Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1351-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    71
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    10.09.2011
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    19.11.2011
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    19.11.2013
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    19.11.2013
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    APPRAISAL
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    EARLY JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    COOK FM
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    18.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    400.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    4063.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4012.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    15
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    141
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BURTON FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    61° 47' 42.49'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 43' 4.38'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6851554.92
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    485123.66
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    6588

  • Wellbore history
    General
    Well 34/3-3 S was drilled on the Jordbær Vest west of the Knarr field (formerly called Jordbær) in the northern part of the North Sea. The objective was to prove hydrocarbons in the Early Jurassic Cook formation.
    Operations and results
    Wildcat well 34/3-3 S was spudded with the semi-submersible installation West Alpha on 10 September 2011 and drilled to TD at 4063 m (4012 m TVD) in the Early Jurassic Burton Formation. A 9 7/8" pilot hole was drilled to 983 m to check for shallow gas. No shallow gas was encountered. The well was drilled vertical down to 2220 m and deviated with up to 15 dg inclination from there to TD. No significant problem was reported. The well was drilled with sea water and hi-vis sweeps down to 984 m, with Glydril/KCl mud from 984 m to 2240 m, with Versatec oil based mud from 2240 m to 3780 m, and with Versatherm oil based mud from 3780 m to TD.
    Cook Formation sandstones were penetrated at 3907.5 m (3859.8 m TVD), which was 42.8 m deeper than prognosed. Light oil was encountered in the upper Cook Formation down to 3932 m (3884 m TVD). A definite OWC was not resolved from the data. Convincing oil shows were recorded on cores from the reservoir down to 3938 m, otherwise no oil shows above the oil based mud were reported from the well.
    A total of 80.42 m core was cut in the Cook Formation from 3910.85 m to 3992 m. The upper 9 m of core 1 was fragmented due to problems with the inner core liner. Core depth shifts were from 0.14 to 0.94 m relative to logger's depth. MDT fluid samples were taken at 3915.9 m (oil) and 3946.7 m (water). The temperature at sea bed was measured by ROV and at survey stations in the Jordbær area wells at different times during the year. These measurements gave an average of 6.5 deg C at sea bed.
    The well was plugged back for sidetracking on 19 November 2011. It is classified as an oil discovery.
    Testing
    A successful DST was performed over the interval in 3912.5 to 3928.5 m in the Upper Cook Formation. The reservoir produced at a rate of 1220 Sm3 oil and 75700 Sm3 gas/day through a 32/64" fixed choke during the main flow. The first stage separator GOR was 62 Sm3/Sm3, oil density was 0.778 - 0.805 g/cm3, H2S = 5 - 10 ppm, CO2 = 4 - 9%, and gas gravity was 0.832 - 0.864 (air = 1). The maximum bottom hole temperature measured during the main flow was 137.8 deg C.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    990.00
    4063.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    3910.9
    3938.4
    [m ]
    2
    3938.4
    3965.8
    [m ]
    3
    3965.8
    3991.3
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    80.4
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Oil samples at the Norwegian Offshore Directorate
    Oil samples at the Norwegian Offshore Directorate
    Test type
    Bottle number
    Top depth
    MD [m]
    Bottom depth
    MD [m]
    Fluid type
    Test time
    Samples available
    MDT
    3928.50
    3912.50
    OIL
    YES

  • Lithostratigraphy

  • Drill stem tests (DST)
    Drill stem tests (DST)
    Test number
    From depth MD
    [m]
    To depth MD
    [m]
    Choke size
    [mm]
    1.0
    3912
    3928
    12.7
    Drill stem tests (DST)
    Test number
    Final shut-in pressure
    [MPa]
    Final flow pressure
    [MPa]
    Bottom hole pressure
    [MPa]
    Downhole temperature
    [°C]
    1.0
    137
    Drill stem tests (DST)
    Test number
    Oil
    [Sm3/day]
    Gas
    [Sm3/day]
    Oil density
    [g/cm3]
    Gas grav. rel.air
    GOR
    [m3/m3]
    1.0
    1200
    75700
    0.778
    0.832
    62

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    GR DI
    418
    498
    GR DI
    498
    984
    GR RES DEN NEU DI APWD
    3992
    4063
    GR RES DI APWD SON
    418
    983
    GVR GR RES DI APWD
    3781
    3911
    MDT
    3907
    3965
    MSCT GR
    3774
    4047
    PDGR GR RES DI APWD SON
    984
    2240
    PDGR GR RES DI APWD SON DEN
    2240
    3781
    PEX CMR ECS HNGS
    3896
    4008
    VSI4 GR
    2000
    4040
    ZAIT PPC MSIP PPC GPIT GR
    3726
    4066

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    36
    496.0
    42
    498.0
    0.00
    LOT
    SURF.COND.
    20
    980.0
    26
    984.0
    1.66
    LOT
    INTERM.
    13 3/8
    2235.0
    17 1/2
    2240.0
    1.92
    LOT
    INTERM.
    9 5/8
    3774.0
    12 1/4
    3781.0
    2.06
    LOT
    LINER
    7
    4053.0
    8 1/2
    4063.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    2570
    1.60
    37.0
    Versamud
    3910
    1.80
    41.0
    Versamud
    3938
    1.80
    40.0
    Versamud
    3992
    1.80
    41.0
    Versamud
    4063
    1.78
    36.0
    Versamud
    4063
    0.00
    53.0
    Versamud
    4063
    1.78
    36.0
    Versamud
    4063
    1.03
    1.0
    Versamud