34/10-44 S
Export: PDF
-
General information
-
Wellbore history
GeneralWell 34/10-44 S was drilled under and east of the Rimfaks Discovery in the southern Tampen Spur area. The primary objective was gas injection in the Statfjord Formation Reservoir, which did not get sufficient support by the existing injector 34/10-J-1 H. The well is located in the P3 segment, situated in the northern part of the Rimfaks Discovery. The secondary objective was to drill into the Lunde Formation to investigate the hydrocarbon potential in this formation in the Rimfaks structure. Tertiary objective is gathering additional reservoir data for the Cook Formation. Coring was planned in the upper and middle parts of the formation.Operations and resultsExploration well 34/10-44 S was spudded with the semi-submersible installation Transocean Wildcat on 30 May 2001 and drilled deviated to TD at 4865 m (3671 m TVD RKB) in the Triassic Lunde Formation. The top hole was vertical down to 226 m where the well started to build angle. The well was drilled using seawater and hi-vis pills down to 709 m, with Glydril KCl /polymer mud from 719 m to 2312 m, and with Versavert oil based mud from 2312 m to TD.The Cook Formation was not present in the well. The well penetrated a 490 m interval with gas and condensate in a reservoir with moderate to good reservoir properties in the Lunde Formation.One core was cut from 4447 m to 4492 m.Well 34/10-44 S was suspended on 8 July 2001 as a gas/condensate discovery. It was re-entered with the semi-submersible installation Deepsea Trym for production testing.TestingA production test was performed in the Lunde Formation. The test produced oil, condensate, and gas from two different zones. Testing operations were terminated on 30 September 2001 and the test interval was permanently plugged and abandoned. After testing the well was converted to gas injection well 34/10-J-4 H in the Statfjord Formation. -
Lithostratigraphy
Lithostratigraphy Top depth [mMD RKB]Lithostrat. unit16216284196596520022002206022782278349834983535372037203776398242004200 -
Documents – reported by the production licence (period for duty of secrecy expired)
Documents – reported by the production licence (period for duty of secrecy expired) Document nameDocument formatDocument size [MB].pdf5.10.PDF0.77 -
Drill stem tests (DST)
Drill stem tests (DST) Test numberFrom depth MD
[m]To depth MD
[m]Choke size
[mm]1.04654486817.42.04627464911.1Drill stem tests (DST) Test numberFinal shut-in pressure
[MPa]Final flow pressure
[MPa]Bottom hole pressure
[MPa]Downhole temperature
[°C]1.02.0Drill stem tests (DST) Test numberOil
[Sm3/day]Gas
[Sm3/day]Oil density
[g/cm3]Gas grav. rel.airGOR
[m3/m3]1.05505600000.7700.74210202.06453500000.7950.745542 -
Logs
Logs Log typeLog top depth [m]Log bottom depth [m]GR MDT CMR+37303853GR MDT CMR+37653765GR MDT CMR+ MDT SAMPLE38614587MWD CDR - VISION ADN04818 -
Casing and leak–off tests
Casing and leak–off tests Casing typeCasing diam.
[inch]Casing depth
[m]Hole diam.
[inch]Hole depth
[m]LOT/FIT mud eqv.
[g/cm3]Formation test typeCONDUCTOR30220.036220.00.00LOTSURF.COND.20711.026724.01.54LOTINTERM.13 3/82305.017 1/22315.01.73LOTINTERM.9 5/83752.012 1/43762.01.74LOTLINER74865.08 1/24865.00.00LOT -
Drilling mud
Drilling mud Depth MD [m]Mud weight [g/cm3]Visc. [mPa.s]Yield point [Pa]Mud typeDate measured7111.03seawater23051.44Glydrillr37521.60Versavert48611.56Versavert48650.00seawater -
Pressure plots
Pressure plots The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.Pressure plots Document nameDocument formatDocument size [MB]pdf0.22