Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
09.05.2024 - 01:35
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6507/5-9 S

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6507/5-9 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6507/5-9
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    PGU18301-2006-HR / PGU18301-4014-HR
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    PGNiG Upstream Norway AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1781-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    29
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    30.08.2019
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    27.09.2019
    Plugged date
    Date when plugging operations was finished, as reported by the operator to the Norwegian Offshore Directorate through DDRS (Daily Drilling Reporting System).
    27.09.2019
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    27.09.2021
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    10.11.2021
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL/GAS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    FANGST GP
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    EARLY JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    BÅT GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    32.5
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    358.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2317.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2293.0
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    BÅT GP
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    65° 39' 35.84'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    7° 38' 50.85'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7282861.20
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    437797.13
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    8866
  • Wellbore history

    Well 6507/5-9 S was entered with the semi-submersible rig Deepsea Nordkapp on 30 August 2019 and drilled to TD at 2317 m (2293 m TVD) in the Early Jurassic Åre Formation The well was drilled as a deviated S-shaped borehole with an inclination of 17° and 305-azimuth through the reservoir interval. The well was drilled down to 456.5 m with seawater and sweeps, from 456.5 to 1103 m with seawater, hi-vis, and KCl/Glycol water-based mud , and from 1103 m to TD with Innovert oil-based mud.
    The primary target, top Garn Formation in the Fangst Group, was penetrated at 2033 m (1988.5 m TVD MSL) and consists of well sorted massive sandstone. The Not Formation was encountered at 2061 m (2015.8 m TVD MSL) and consists of argillaceous and silty sandstone. The Tilje Formation was encountered at 2072.5 m (2026.8 m TVD MSL) and Åre Formation at 2086 m (2039.7 m TVD MSL). The secondary target, Lower Tilje/Åre Formation, was encountered at 2243 m (2190.2 m TVD MSL) where the formations consists of interbedded sandstone, siltstone, and claystone with high content of coal beds representing an Intra Åre coal unit. Well 6507/5-9 S encountered in the reservoir section a 45 m gross gas column and a 39 m thick oil column in an extensive sandstone package with mainly good to very good reservoir quality of Fangst and Båt groups of Jurassic age. The gas-oil contact (GOC) was encountered at 2079 m (2033 m TVD MSL) determined from formation pressure gradient analysis and the oil-water contact (OWC) at 2119.6 (2072 m TVD MSL). However, the neutron-density logs crossover indicated GOC at 2074.9 m (2029.1 m TVD MSL). The reservoir hydrocarbon zone Net/Gross ratio was calculated to be at 78.2%.
    Three core runs with a total of 126 m of core was cut through the hydrocarbon bearing rock sequences and into the water wet zone in the primary target. A total of 121.7 m partly unconsolidated and in general weak core material was recovered to surface. MDT pressure survey and fluid sampling were performed. MDT fluid sample were taken at 2038 m (1993.8 m TVD MSL, gas), 2074 m (2028.25 m TVD MSL, gas), 2088.9 m (2042.6 m TVD MSL, oil), 2116.5 m (2069 TVD MSL, oil) and 2121.6 m (2073.83 m TVD MSL, water). The second target interval was not hydrocarbon bearing and co coring was performed. After the discovery, it was decided to drill the 6507/5-9 A sidetrack to verify extension of hydrocarbon bearing reservoir.
    The well with its sidetrack was permanently plugged and abandoned on 27 September 2019 as a small discovery with potential for development.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    1110.00
    2317.00
  • Cores at the Norwegian Offshore Directorate

    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    2041.8
    2076.9
    [m ]
    2
    2077.5
    2113.8
    [m ]
    3
    2113.8
    2163.9
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    121.5
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    GR CMR MDT
    2038
    2196
    HNGS HGNS HDRS AIT
    1989
    2317
    IBC CBL
    1747
    2310
    LWD - DGR ADR FR LD CTN PWD DIR
    1996
    2317
    LWD - DGR EWR P4 XBAT PWD DIR
    456
    1103
    LWD - DIR
    391
    456
    LWD - GEOT PWD DIR
    1103
    1996
    LWD - GP DGR EWR P4 ALD CTN XBAT
    1103
    1996
    PPC MSIP DOBMI
    1989
    2317
    VSI4
    586
    2310
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    456.0
    36
    458.0
    0.00
    SURF.COND.
    13 3/8
    1096.0
    17 1/2
    1103.0
    1.66
    LOT
    INTERM.
    9 5/8
    1980.0
    12 1/4
    1986.0
    1.58
    FIT
    OPEN HOLE
    2293.0
    8 1/2
    2293.0
    0.00