Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
28.04.2024 - 01:35
Time of last synchronization with Norwegian Offshore Directorate's internal systems

30/3-7 A

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/3-7 A
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    30/3-7
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    ST 8513R94-201& SP. 867
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Den norske stats oljeselskap a.s
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    903-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    95
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    13.10.1997
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    29.01.1998
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    29.01.2000
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    07.11.2005
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    GAS/CONDENSATE
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    MIDDLE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    BRENT GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    56.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    175.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    6678.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    4181.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    73.9
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    DRAKE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    60° 46' 57.98'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 53' 51.95'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6738755.54
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    494432.48
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    3176

  • Wellbore history
    General
    Well 30/3-7 A was drilled on the Veslefrikk Field. The primary objective of the well was to explore the sand potential and possible hydrocarbons in the Late Jurassic sequence west of the Veslefrikk Field (the K-prospect). Well 30/7-3 S, was drilled on the same prospect in 1995, but did not reach the prospect due to an unforeseen fault system. A secondary objective was to drill through the Brent Group of the B-prospect, as a pilot well for a second sidetrack, the 30/3-7B well.
    Operations and results
    Wildcat well 30/3-7 A was drilled as a sidetrack to well 30/3-7 S, from the fixed surface installation Veslefrikk A. It was first kicked off through the 9 5/8" casing at 3459 - 3462 m in the primary well bore on 13 October 1997. The mill got stuck in the window and the string had to be backed off. A cement plug was set above the fish and a second window was milled from 3336 m to 3340 m. Due to possible high pressure scenarios above the strongly faulted complex penetrated by well bore 30/7-3 S it was decided to run and cement a 7" liner at 5705 m and the bottom part of the well was drilled as a 6" hole. A number of problems mainly related to kick-off, MWD, and logging at high temperatures (in excess of 150 deg C), led to 111 days spent on the well compared to the planned 33.5 days. The well was drilled to final TD at 6678 m in the Early Jurassic Drake Formation. The mud used was Ultidril, a pseudo-oil based mud system where the oil base is synthetic oil (olefines).
    The K-prospect was found to consist of well-cemented, fine grained and silty non-reservoir sandstones of Turonian to Coniacian age. There were no recoverable hydrocarbons in this zone. The Base Cretaceous level came in 180 m deeper than prognosed, and the Brent Group came in 168 m deeper than prognosed, whereas the Etive Formation was spot on prognosis. The Tarbert and Ness Formations were thinner, and the base Brent sand (Oseberg Informal Formation) was slightly thinner than prognosed. The logs verified hydrocarbons in the Brent group, but the reservoir quality was generally poor.
    The pore pressures are close to the expected values from the 30/6-11 well. The various reservoir zones did not line up along a common gradient, but seemed to be stacked, separate reservoirs. One core was cut in the Cromer Knoll Group from 5909 m to 5922 m. No fluid sample was taken.
    The well was plugged back to 5510 m and abandoned on 29 January 1998 as a gas/condensate discovery.
    Testing
    No drill stem test was performed.

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    5909.0
    5922.4
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    13.4
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Core photos
    Core photos
    Core photo at depth: 5909-5914m
    Core photo at depth: 5914-5919m
    Core photo at depth: 5919-5922m
    Core photo at depth:  
    Core photo at depth:  
    5909-5914m
    5914-5919m
    5919-5922m

  • Lithostratigraphy

  • Composite logs
    Composite logs
    Document name
    Document format
    Document size [MB]
    pdf
    0.41

  • Documents – reported by the production licence (period for duty of secrecy expired)
    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    pdf
    1.65
    pdf
    22.23
    pdf
    2.09

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    BHI MPR
    3336
    5706
    BHI MPR
    5733
    6678
    FMT GR
    6536
    6592
    MWD - GR RES DIR
    3344
    6678
    RCI GR
    6353
    6581
    RCI GR
    6510
    6692
    TTRM GR CND ZDL MAC HDIL VSP
    5681
    6670
    TTRM GR CND ZDL MAC MRIL
    5690
    6659
    VSP HDIL DPIL GR
    2888
    3114

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    INTERM.
    9 5/8
    3336.0
    12 1/4
    3340.0
    1.80
    LOT
    LINER
    7
    5705.0
    8 3/8
    5706.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    2780
    1.60
    57.0
    INTERDRILL NT
    3344
    1.58
    36.0
    ULTIDRILL
    3447
    1.58
    36.0
    ULTIDRILL
    4687
    1.61
    28.0
    ULTIDRILL
    5286
    1.61
    36.0
    ULTIDRILL
    5501
    1.61
    34.0
    ULTIDRILL
    5679
    1.61
    30.0
    ULTIDRILL
    5740
    1.45
    29.0
    ULTIDRILL
    5909
    1.45
    33.0
    ULTIDRILL
    6373
    1.48
    36.0
    ULTIDRILL
    6472
    1.48
    36.0
    ULTIDRILL
    6510
    1.48
    33.0
    ULTIDRILL
    6678
    1.48
    DUMMY

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.22