Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
27.12.2024 - 01:25
Time of last synchronization with Norwegian Offshore Directorate's internal systems

25/2-15

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/2-15
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    SUSPENDED
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    25/2-15
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    FRØY 3D- EL 8891 & COLUMN 636&Row636
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Elf Petroleum Norge AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    722-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    61
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    14.11.1992
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    13.01.1993
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    13.01.1995
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    15.02.2006
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL SHOWS
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    18.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    120.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3505.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3504.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    3
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    MIDDLE JURASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    HEATHER FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    59° 48' 53.54'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 30' 6.2'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6631053.91
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    472050.87
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    1938
  • Wellbore history

    General
    Well 25/2-15 is located in the southern part of block 25/2, and was designed to recognize the petroleum potential of the so-called Jurassic Prospect 1. The main objective of the well was to explore the Middle Jurassic Brent sandstones. An optional objective was Early Jurassic Statfjord sandstones, depending on the petroleum results at the Brent level.
    Operations and results
    Wildcat well 25/2-15 was spudded with the semi-submersible installation West Alpha on 14 November 1992 and drilled to TD at 3505 m in Middle Jurassic sediments of the Heather Formation.
    After drilling to TD at 3505 m in the 12 1/4" section the drill string was hung off with bit at 13 3/8" casing shoe, due to bad weather. A long period of bad weather followed with a total of 170 hours WOW. On 13 January 1993, when reaming up the hole to set 9 5/8" casing, a fire broke out in the port side engine room. As a consequence of this three anchor chains were lost and the rig started to drift. The drill string was sheared and the LMRP was disconnected. All unnecessary personnel were evacuated. The situation was brought under control, but due to the damage occurring in engine room, it was decided to substitute the rig, pull anchors and move the rig to Haugesund fjord. The well was drilled with seawater and hi-vis bentonite sweeps down to 198 m, with bentonite mud from 198 m to 1150 m, and with gypsum polymer mud treated with 5% polyglycerol from 1150 m to 3505 m.
    All geological results from the well are given in the 25/2-15 R2 history.
    The well was suspended with the drill string fallen in the hole and shear rams closed. The hole was full of 1.27 SG mud. West Alpha left location on 19 January 1993.
    Testing
    No drill stem test was performed in the well.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    210.00
    3505.00
  • Lithostratigraphy

  • Documents – reported by the production licence (period for duty of secrecy expired)

    Documents – reported by the production licence (period for duty of secrecy expired)
    Document name
    Document format
    Document size [MB]
    PDF
    71.40
  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    CBL VDL GR
    987
    2105
    DIL BHC LDL GR AMS
    1000
    2117
    DIL SGR LDL CNL AMS
    2050
    2962
    DLL MSFL BHC GR AMS
    2050
    3109
    DLL MSFL GR
    3457
    3595
    FMS SHDT GR
    2113
    3505
    HP RPQS RFT GR
    2129
    2820
    HP RPQS RFT GR
    3574
    3599
    MWD - RGDM
    138
    3505
    SWC GR
    2129
    2820
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    INTERM.
    20
    1137.0
    26
    1137.0
    1.60
    LOT
    INTERM.
    13 3/8
    2107.0
    17 1/2
    2107.0
    1.50
    LOT
    INTERM.
    9 5/8
    3498.0
    12 1/4
    3498.0
    1.72
    LOT
    OPEN HOLE
    3942.0
    8 1/2
    3942.0
    0.00
    LOT
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    182
    1.04
    WATER BASED
    198
    1.04
    WATER BASED
    883
    1.08
    10.0
    WATER BASED
    1150
    1.10
    10.0
    WATER BASED
    2120
    1.35
    16.0
    WATER BASED
    2423
    1.14
    19.0
    WATER BASED
    2767
    1.20
    28.0
    WATER BASED
    2965
    1.25
    27.0
    WATER BASED
    3295
    1.27
    23.0
    WATER BASED
    3492
    1.27
    23.0
    WATER BASED
    3505
    1.27
    23.0
    WATER BASED