Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
26.12.2024 - 01:26
Time of last synchronization with Norwegian Offshore Directorate's internal systems

15/9-23

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    15/9-23
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    15/9-23
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    PR07M01 xline:10216 & inline 1486
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Det norske oljeselskap ASA (old)
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1267-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    47
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    18.11.2009
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    03.01.2010
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    31.12.2010
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    15.06.2011
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    25.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    84.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    3225.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    3225.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    2.3
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    SKAGERRAK FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    58° 16' 29.1'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    1° 52' 23.2'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6459999.91
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    433900.09
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    6186
  • Wellbore history

    General
    Well 15/9-23 was drilled in the southern Viking Graben, south of the Sleipner East Field in the North Sea. The primary objective was to test the Middle Jurassic Hugin and Sleipner formations and the Triassic Skagerrak formation within the Skardkollen prospect. The Early Paleocene Ty Formation was secondary objective.
    Operations and results
    Wildcat well 15/9-23 was spudded with the semi-submersible installation Bredford Dolphin on 18 November 2009 and drilled to TD at 3225 m in late Triassic sediments of the Skagerrak Formation. A 9 7/8" pilot hole was drilled from the 36" section to 714 m and a shallow gas zone was encountered at 674 to 678 m. The hole was opened to 26" down to 556 m, and 20" casing was set at 550 m. The well was drilled with seawater and hi-vis sweeps down to 556 m, with KCl/Glycol mud from 556 to 1520 m, and with XP-07oil based mud from 1520 m to TD.
    The top of the first Frigg Formation sand was penetrated at 2092 m. The secondary target, the Ty Formation of the lowermost Rogaland Group was penetrated at 2524 m. The Ty Formation constituted excellent reservoir sandstones with a gross thickness of 24 m. GeoTap pressure measurements detected a pore pressure depletion of 105 bar compared to a normal hydrostatic gradient, most likely related to production at the nearby Sleipner East Field within the same stratigraphical unit. The primary reservoir target, the Middle-Jurassic Vestland Group, was penetrated at 3087.5 m, 45.5m deeper than anticipated. The Hugin Formation was absent, and the top of the Vestland Group consisted of the coal-bearing Sleipner Formation. Firm identification of red-brown Triassic mudstones of the Skagerrak Formation was penetrated at 3169 m, 5.5m shallower than prognosed. GeoTap pressure measurements through the Sleipner- and Skagerrak Formations also detected higher overpressures (65-73-89 bar) than measured in the nearby, analogue wells. The high and vertically varying overpressures, in combination with the low N/G and inferred poor/non-effective sand-to-sand connectivity, may explain the failure of hydrocarbons migrating into the Skardkollen structure.
    All reservoirs were water-wet. The only show recorded in the well was a very weak show on cuttings in the Sleipner Formation. Lack of supportive from logs and gas levels suggested that the show could be caused by the drilling fluid.
    No cores were cut. No logs were run on wire line, all logs are from LWD. No fluid samples were taken.
    The well was permanently abandoned on 3 January 2010 as a dry well.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    640.00
    3225.00
  • Lithostratigraphy

  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    MWD LWD - DIR
    109
    178
    MWD LWD - EWR GR PWD ALD CAL CNT
    3004
    3225
    MWD LWD - GR RES ALD CTN BAT GEO
    1525
    3004
    MWD LWD - GR RES PWD DIR
    178
    1523
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    175.0
    36
    178.0
    0.00
    LOT
    SURF.COND.
    20
    550.0
    26
    713.0
    1.65
    LOT
    INTERM.
    13 3/8
    1519.0
    17 1/2
    1525.0
    1.95
    LOT
    INTERM.
    9 5/8
    2998.0
    12 1/4
    3005.0
    2.10
    LOT
    OPEN HOLE
    3225.0
    8 1/2
    3225.0
    0.00
    LOT
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    109
    1.04
    Spud mud
    178
    1.04
    Spud mud
    199
    1.30
    Seawater
    502
    1.04
    Spud mud
    547
    1.20
    11.0
    KCl/GEM
    714
    1.25
    Spud mud
    1145
    1.22
    23.0
    KCl/GEM
    1380
    1.20
    22.0
    KCl/GEM
    2589
    1.25
    20.0
    XP-07
    3004
    1.35
    22.0
    XP-07
    3225
    1.36
    21.0
    XP-07