Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no    Norsk
sodir.no          Norsk
21.11.2024 - 01:28
Time of last synchronization with Norwegian Offshore Directorate's internal systems

34/10-48 S

Export: PDF icon PDF

  • General information
    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/10-48 S
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORTH SEA
    Field
    Name of the field the wellbore is related to.
    Discovery
    Name of the discovery the wellbore is related to.
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    34/10-48
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    linje 2951 & CDP 3135
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Statoil ASA (old)
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1071-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    281
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    17.03.2004
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    22.12.2004
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    22.12.2006
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    28.02.2008
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    OIL
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    YES
    1st level with HC, age
    Age of lithostratigraphic unit, 1st level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE. See also Norwegian Offshore Directorate bulletins.
    LATE JURASSIC
    1st level with HC, formation
    Name of lithostartigraphic unit, 1st level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP. See also Norwegian Offshore Directorate bulletins.
    VIKING GP
    2nd level with HC, age
    Age of lithostratigraphic unit, 2nd level, where hydrocarbons were encountered. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EOCENE.
    MIDDLE JURASSIC
    2nd level with HC, formation
    Name of lithostartigraphic unit, 2nd level, where hydrocarbons were encountered. Shown only for released wells. Examples of legal values: BASEMENT, COOK FM, EKOFISK FM, HEIMDAL FM, SANDNES FM, SOGNEFJORD FM, TARBERT FM, BRENT GP.
    BRENT GP
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    84.1
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    216.9
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    7393.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2933.0
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    92.6
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    107
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    LATE TRIASSIC
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    LUNDE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    61° 12' 53.78'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    2° 16' 27.79'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    6787106.31
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    461018.63
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    31
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    4902

  • Wellbore history
    General
    Well 34/10-48 S was drilled on the Gullfaks Field in the Northern North Sea, from the Gullfaks C platform. The main objective was to test the hydrocarbon potential of the Brent Group in the Topas prospect. The secondary objectives were to test the hydrocarbon potential in 3 leads; the Nesle lead east of the Topas prospect, the U2 lead in the slope of the Gullfaks Horst and Late Jurassic at the base of the main bounding fault limiting the Gullfaks Structure to the east. The well should be completed as a producer.
    Operations and results
    Well 34/10-48 S was spudded from a preset 32" conductor at slot 29 on the Gullfaks C platform on 17 March 2004.
    The planned well was a very challenging one, with a complex and highly deviated well path. Deviation from vertical was 11 deg at 438 m and was increased to ca 66 deg from 1500 m. When entering the Lunde Formation inclination was 56 deg, and from ca 5500 m in the Brent Group and to TD the well path was kept approximately horizontal. It was planned drilled in 4 sections, 24", 17 1/2", 12 1/4" and 8 1/2". The planned TD of the well was 6848 m. Information gathered while drilling the 8 1/2" section led to a change in plans and the well path in the reservoir was changed and extended with 550 m. The well 48 S was drilled to 7393 m. The well was drilled with spud mud in the 24" section from 443 m to 1355 m, with Glydril mud in the 17 1/2" section from 1355 m to 2610 m, and with Versavert oil based mud in the remaining sections from 2610 m to TD.
    The well was classified as exploration well from 3600 m. The Lunde Formation was penetrated at 3657 m. Hydrocarbon filled sandstones in this Formation (the U2 lead) were encountered at 4272 m /2470 m TVD, while the sandstone layer at the base of the main bounding fault, at 4891 m / 2800 m TVD, was water filled. The Topas prospect was penetrated some 7.5 m shallow to prognosis. The well drilled through hydrocarbon filled Tarbert Formation and into water filled Ness Formation. Since the well drilled water filled Ness, Etive and Rannoch Formations the well path was revised and the Nesle lead was drilled higher on the structure. The well drilled through some hydrocarbon filled Late Jurassic sands (Intra Heather Formation sandstone) before entering hydrocarbon filled sands of the Ness and Tarbert Formations of the Topas prospect in the PL120 licence. The well path was steered down and the oil water contact was found at 7133 m /2929 m TVD RKB in the Tarbert Formation. The preliminary results of the well 34/10-48 S indicated that the well path had penetrated low on the Topas structure and that the well path was not ideal for production. It was therefore decided to drill a sidetrack and aim as high on the re-interpreted structure as possible.
    One core was cut in the Tarbert Formation from 5174 to 5207.15 m. MDT fluid samples were collected at 4372 m, 4455 m, 4492 m and 4533 m in the Lunde Formation. All samples contained oil with relatively high gas/oil ratio.
    Well bore 34/10-48 S was plugged back to 5060 m and permanently abandoned on 22 December 2004 as an oil discovery. Well side track 34/10-48 A was initiated.
    Testing
    No drill stem test was performed.

  • Cuttings at the Norwegian Offshore Directorate
    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    3600.00
    7392.00

  • Cores at the Norwegian Offshore Directorate
    Cores at the Norwegian Offshore Directorate
    Core sample number
    Core sample - top depth
    Core sample - bottom depth
    Core sample depth - uom
    1
    5174.0
    5207.2
    [m ]
    Cores at the Norwegian Offshore Directorate
    Total core sample length [m]
    33.2
    Cores at the Norwegian Offshore Directorate
    Cores available for sampling?
    YES

  • Lithostratigraphy

  • Logs
    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    ARC6 ADN6
    5608
    5878
    ARC6 ADN6
    5850
    6221
    EMS GR MDT DN
    3670
    5005
    EMS GR MDT UP
    5005
    2600
    LWD - ARC ISONIC ADN8
    2667
    5106
    LWD - ARC6 ADN6
    5106
    7393
    LWD - ARC6 ADN6 TST6
    5106
    5850
    LWD - CDR
    224
    725
    LWD - CDR
    1287
    2667
    MDT
    5140
    7145
    MDT ECS CMR DN
    5140
    6413
    MDT ECS CMR UP
    5149
    6413

  • Casing and leak–off tests
    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    SURF.COND.
    20
    1283.0
    24
    1287.0
    0.00
    LOT
    INTERM.
    13 3/8
    2661.0
    17 1/2
    2667.0
    1.83
    LOT
    INTERM.
    9 5/8
    5108.0
    12 1/4
    5109.0
    0.00
    LOT
    OPEN HOLE
    7393.0
    8 1/2
    7393.0
    0.00
    LOT

  • Drilling mud
    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    670
    1.12
    18.0
    SEAWATER/CMC
    1153
    1.12
    19.0
    SEAWATER/CMC
    1288
    1.20
    27.0
    SEAWATER/CMC
    1520
    1.29
    16.0
    GLYDRIL 12
    2667
    1.55
    37.0
    GLYDRIL 12
    3759
    1.65
    70.0
    VERSAVERT 42
    3825
    1.64
    60.0
    VERSAVERT 41
    5105
    1.60
    35.0
    VERSAVERT 41
    5109
    1.59
    53.0
    VERSAVERT 41
    6057
    1.60
    53.0
    VERSAVERT 41
    6244
    1.58
    44.0
    VERSAVERT 41
    7393
    1.58
    57.0
    VERSAVERT 41

  • Pressure plots
    Pressure plots
    The pore pressure data is sourced from well logs if no other source is specified. In some wells where pore pressure logs do not exist, information from Drill stem tests and kicks have been used. The data has been reported to the NPD, and further processed and quality controlled by IHS Markit.
    Pressure plots
    Document name
    Document format
    Document size [MB]
    pdf
    0.25