Factpages Norwegian Offshore Directorate
Factpages Norwegian Offshore Directorate
sodir.no          Norsk
10.05.2024 - 01:33
Time of last synchronization with Norwegian Offshore Directorate's internal systems

6507/11-7

Export: PDF icon PDF
  • General information

    General information
    Attribute Value
    Wellbore name
    Official name of wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6507/11-7
    Type
    Wellbore type. Legal values: EXPLORATION, DEVELOPMENT, OTHER (see 'Purpose' for more information)
    EXPLORATION
    Purpose
    Final classification of the wellbore.

    Legal values for exploration wellbores:
    WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS.

    Legal values for development wellbores:
    OBSERVATION, PRODUCTION, INJECTION, INJECTION-CCS, OBSERVATION-CCS.

    Legal values for other wellbores:
    SOIL DRILLING (drilling in connection with track surveys and other subsurface surveys to investigate the soil conditions prior to placement of facilities),
    SHALLOW GAS (drilling to investigate shallow gas before the first 'real' drilling on the location),
    PILOT (drilling to investigate the geology and fluid connectors for location of the main wellbore),
    SCIENTIFIC (drilling according to Law of Scientific research and exploration),
    STRATIGRAPHIC (driling according to Law of Petroleum activities §2-1).
    WILDCAT
    Status
    Status for the wellbore. Legal values are:

    BLOWOUT: A blowout has occurred in the well.
    CLOSED: A development wellbore that has been closed in a shorter or longer periode. Also applies to development wellbores where drilling is completed, but production/injection has not yet been reported.
    DRILLING: The well is in the drilling phase - can be active drilling, logging, testing or plugging,
    JUNKED: The drilling operation has been terminated due to technical problems.
    P&A: Exploration: The well is plugged and abandoned, and can not be reentered for further use. Development wells: The production/injection from/to the well is stopped and the well is plugged. The wellhead is removed or else made unavailable for further well operations.
    PLUGGED: The wellbore has been plugged, but the upper parts of the wellbore can be re-used. A sidetrack might be drilled at a later stage.
    PRODUCING: It was produced from the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    INJECTING: It was injected to the wellbore at the time of the operators last monthly report to the Norwegian Offshore Directorate.
    PREDRILLED: The upper part of the well has been drilled, usually as part of a batch-drilling campaign covering several wellbores.
    RE-CLASS TO DEV: Exploration wellbore that is reclassified to a development wellbore.
    RE-CLASS TO TEST: Exploration wellbore that is reclassified to test production.
    SUSPENDED: The drilling operation in the wellbore has been temporarily stopped. The current plan is to continue drilling later on.
    P&A
    Press release
    Factmaps in new window
    Main area
    Name of the area on the Norwegian Continental Shelf where the wellbore is located. Legal values: BARENTS SEA, NORWEGIAN SEA, NORTH SEA.
    NORWEGIAN SEA
    Well name
    Official name of the parent well for the wellbore based on Norwegian Offshore Directorate guidelines for designation of wells and wellbores.
    6507/11-7
    Seismic location
    Position of spud location on seismic survey lines. SP: shotpoint.
    Seismic survey MC3D-MGW98 inline4277-crossline 4238
    Production licence
    Official designation of the production licence the wellbore was drilled or planned to be drilled from ( well head posistion).
    Drilling operator
    Name of the licensee starting the drilling operation on behalf of the active production license (well head position). This will usually equal the operator of the production license.
    Norsk Hydro Produksjon AS
    Drill permit
    The drilling permit number together with the version of the drilling permit as stated in the drilling permit granted by the Norwegian Offshore Directorate.
    1123-L
    Drilling facility
    Norwegian Offshore Directorate's name of the facility which the wellbore was drilled from.
    Drilling days
    Number of days from wellbore entry to wellbore completion.
    62
    Entered date
    The date when he wellbore was spudded. For sidetracks: The date when new formation was drilled by kicking off from the mother-wellbore,
    13.12.2006
    Completed date
    Exploration wellbores from moveable facilities:
    For floating facilities - date when anchor handling is started. For jackups - date the jacking-down started. Exploration wellbores from fixed facilities and all development wellbores:
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    Date when the wellbore is at total depth, and last casing, liner or screen is set. In case of immediate plugging of the wellbore, completed date equals the date the last plug i set in the wellbore.
    12.02.2007
    Release date
    Date when raw data which has been reported to the authorities from the wellbore is not confidential any longer. Normally 2 years after finishing the drilling. May be earlier if the area of the production license is relinquished.
    12.02.2009
    Publication date
    Date quality control of the wellbore information was completed, so it can be published on the internet as a 'Well Data Summary Sheet' wellbore with more information available than other wellbores.
    09.03.2009
    Purpose - planned
    Pre-drill purpose of the wellbore. Legal values for exploration wellbores: WILDCAT, APPRAISAL, WILDCAT-CCS, APPRAISAL-CCS. Example of legal values for development wellbores: OBSERVATION, PRODUCTION, INJECTION.
    WILDCAT
    Reentry
    Status whether the wellbore has been re-entered (YES) or not (NO). Re-entered wellbores are not included in the count when wellbores are presented in statistical overviews.
    NO
    Content
    For exploration wellbores, status of discovery.

    Legal values:
    DRY, SHOWS (trace amounts of hydrocarbons), GAS, GAS/CONDENSATE, OIL or OIL/GAS.
    SHOWS (GAS SHOWS, OIL SHOWS or OIL/GAS SHOWS) are detected as fluorescent cut (organic extract), petroleum odour, or visual stain on cuttings or cores, or as increased gas reading on the mud-loggers gas detection equipment.
    Legal values for WILDCAT-CCS and APPRAISAL-CCS: WATER

    For development wellbores, type of produced/injected fluid.
    Legal values:
    WATER, CUTTINGS, NOT AVAILABLE, OIL, GAS/CONDENSATE, OIL/GAS, CO2, GAS, WATER/GAS, NOT APPLICABLE.
    DRY
    Discovery wellbore
    Indicator which tells if the wellbore made a new discovery. Legal values: YES, NO. Prior to press-release or other information regarding drilling results, the indicator will be “NO” as a default.
    NO
    Kelly bushing elevation [m]
    Elevation of the rotary kelly bushing (RKB) above mean sea level.
    26.0
    Water depth [m]
    Depth in metres betweem mean sea level and sea floor.
    294.0
    Total depth (MD) [m RKB]
    Total measured length of wellbore from kelly bushing to total depth (driller's depth).
    2950.0
    Final vertical depth (TVD) [m RKB]
    Vertical elevation from total depth to kelly bushing. Shown only for released wells. Referred to as true vertical depth (TVD).
    2948.8
    Maximum inclination [°]
    Maximum deviation, in degrees, from a vertical well path.Shown only for released wells.
    3.4
    Bottom hole temperature [°C]
    Estimated temperature at final total depth of the wellbore. Shown only for released wells. See discription.
    107
    Oldest penetrated age
    Age (according to Geologic Time Scale 2004 by F. M. Gradstein, et al. (2004)) of the oldest penetrated formation. May differ from age at TD for example in deviated wellbores. Examples of legal values: CRETACEOUS, EARLY CRETACEOUS, LATE JURASSIC, EARLY PERMIAN, EARLY TRIASSIC, EOCENE.
    EARLY CRETACEOUS
    Oldest penetrated formation
    Name of the oldest lithostratigraphic unit penetrated by the wellbore. Shown only for released wells. In most wellbores this is formation or group at total depth. May differ from formation or group at TD for example in wellbores drilled with high deviation or through faults. Examples of legal values: AMUNDSEN FM, BALDER FM, BASEMENT, BLODØKS FM, BRYNE FM, BURTON FM, COOK FM, DRAKE FM, DRAUPNE FM, EKOFISK FM, DUNLIN GP.
    LANGE FM
    Geodetic datum
    Reference system for coordinates. Example of legal values: ED50.
    ED50
    NS degrees
    Geographic coordinate of the wellhead, north-south degrees.
    65° 10' 54.58'' N
    EW degrees
    Geographic coordinate of the wellhead, east-west degrees.
    7° 21' 52.8'' E
    NS UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, north-south.
    7229892.52
    EW UTM [m]
    Universal Transverse Mercator coordinate of the wellhead, east-west.
    423410.55
    UTM zone
    Universal Transverse Mercator zone. Examples of legal values: 31, 32, 33, 34.
    32
    NPDID wellbore
    Norwegian Offshore Directorate's unique id for the wellbore.
    5430
  • Wellbore history

    General
    Wildcat well 6507/11-7 is located in the Grinda Graben, a major structural element in PL263 on the Halten Terrace off shore mid Norway. The primary objective of the well 6507/11-7 was to prove commercial hydrocarbon resources in the Late Cretaceous Zita prospect. The Zita prospect is a Lysing Formation reservoir in a stratigraphic trap model. A secondary objective of the well was to prove commercial hydrocarbon resources within the Late Cretaceous Zit-B prospect. The Zit-B prospect is an Upper Lange Fm reservoir in a stratigraphic trap model.
    Operations and results
    Well 6507/11-7was spudded with the semi-submersible installation Transocean Winner on 13 December 2006 and drilled to TD at 2950 m in Early Cretaceous (Late Albian) sediments of the Lange Formation. Spudding was made difficult by large boulders and unacceptable inclination in the first top hole led to a re-spud ca 15 m northwest of the original location. Otherwise operations proceeded without significant problems. The well was drilled with spud mud down to 535 m, with Polymer/KCl brine mud from 535 m to 2484 m, and with Ultradril mud from 2484 m to TD. The Ultra drill mud contains Ultrafree NS, which consists of C14-C16 linear alpha olefins.
    No hydrocarbons were proven in the well. Calcite cemented sand layers of Coniacian toTuronian age (Lysing Formation) were encountered in a 39 m thick interval (2777 - 2817 m). The stacked sand layers had very low porosities and permeability values, and was water wet. Formation pressure measurements showed higher pressure in the Lysing Formation sands in well 6507/11-7, than in the comparable down-dip Smørbukk S discovery in the Lysing Formation This indicated that the encountered sands were not in direct pressure communication with the Lysing Formation sands in the region. Post-well organic geochemical analyses of mud gas, cuttings and SWC's confirmed a dry well with no indication of migrated hydrocarbons.
    The formation evaluation programme for not making a discovery was carried through, comprising one run with wire line logging, MDT pressure point measurements and MSCT sidewall samples, in order to confirm the well results. No cores were taken, no VSP was gathered and no formation fluid sample was collected.
    The well was permanently abandoned on 12 February 2007 as a dry well.
    Testing
    No drill stem test was performed.
  • Cuttings at the Norwegian Offshore Directorate

    Cuttings at the Norwegian Offshore Directorate
    Cuttings available for sampling?
    YES
    Cuttings at the Norwegian Offshore Directorate
    Cutting sample, top depth [m]
    Cutting samples, bottom depth [m]
    550.00
    2950.00
  • Lithostratigraphy

  • Geochemical information

    Geochemical information
    Document name
    Document format
    Document size [MB]
    pdf
    0.27
    pdf
    2.31
  • Logs

    Logs
    Log type
    Log top depth [m]
    Log bottom depth [m]
    GR RES NEU DEN DIR APWD
    2753
    2950
    MDT GR
    2783
    2880
    MSCT GR
    2751
    2885
    MWD - DIR
    320
    535
    MWD - GR RES DIR APWD
    535
    1115
    MWD - GR RES NEU DIR APWD SONIC
    1115
    2484
    PEX HRLA DSI
    2329
    2948
  • Casing and leak–off tests

    Casing and leak–off tests
    Casing type
    Casing diam.
    [inch]
    Casing depth
    [m]
    Hole diam.
    [inch]
    Hole depth
    [m]
    LOT/FIT mud eqv.
    [g/cm3]
    Formation test type
    CONDUCTOR
    30
    386.0
    36
    387.0
    0.00
    LOT
    SURF.COND.
    20
    532.0
    26
    535.0
    0.00
    LOT
    INTERM.
    13 3/8
    1114.0
    17 1/2
    1115.0
    1.22
    LOT
    INTERM.
    9 5/8
    2478.0
    12 1/4
    2484.0
    1.90
    LOT
    OPEN HOLE
    2950.0
    8 1/2
    2950.0
    1.94
    LOT
  • Drilling mud

    Drilling mud
    Depth MD [m]
    Mud weight [g/cm3]
    Visc. [mPa.s]
    Yield point [Pa]
    Mud type
    Date measured
    390
    1.05
    WATER BASED
    390
    1.05
    WATER BASED
    421
    1.05
    WATER BASED
    1115
    1.18
    22.0
    WATER BASED
    1536
    1.58
    37.0
    WATER BASED
    1709
    1.60
    40.0
    WATER BASED
    2115
    1.60
    36.0
    WATER BASED
    2315
    1.60
    31.0
    WATER BASED
    2445
    1.60
    36.0
    WATER BASED
    2484
    1.62
    32.0
    WATER BASED